2 layers139.7 × 134.1 mm
2 layers139.7 × 134.1 mm
MigitePad
Aleblazer/MigitePad3Nav/Control/Num Pad
- Size
- 139.7 × 134.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 53
- Pads
- 575
- Tracks, vias
- 551, 21
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Feb 2020
- Updated
- 25 Feb 2021
Overview
MigitePad is an open-source printed circuit board by Aleblazer, from the Aleblazer/MigitePad repository on GitHub, published under the MIT licence. It is a 2-layer board of 139.7 × 134.1 mm with 77 parts on 53 nets, routed with 551 tracks and 21 vias.
Its parts include 31 diodes, 2 connectors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdMigitePad
MigitePad! A Numpad/Nav Cluster with QMK Firmware/Kailh Hotswap/OLED/Rotary Encoder!
Even reversable for you crazies who want a backwards Numpad!*
*OLED will need to be trace cut and bodged if you want it to work backwards
Materials needed:
- 30x Kailh Hotswap Sockets (Technically optional, hotswap through holes are plated)
- 31x 1N4148 or SOD-123F Diodes
- 30x MX style switches
- 1x MJTP1117 Reset Switch
- 1x Pro Micro or equivilant (Pro Micro chip side up for normal orientation, bottom side up for reversed.)
- 3x 2u stabilizers
- 1x EC11 Rotary Encoder
- 1x SSD1306 OLED (Optional)
For the 3D Printable Case:
- 6x 6mm M2 standoffs
- 12x M2 4mm or 5mm screws
OLED and Rotary Encoder code would need to be added to the end of your keymap.c. Still working on a more official OLED config. Example code borrowed and tested as working from the RoMac+, and is located in "QMK Keyboard Folder/migitepad/keymaps/default/keymap.c". Also encluded a default hex file in the QMK Keyboard Folder.
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | D_Small | Lily58-footprint:Diode_TH_SOD123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +15 |
| 30 | MX-NoLED | keyswitches:MXOnly-1U-Hotswap-Double-noled | MX1, MX10, MX12, MX14, MX16, MX18, MX20, MX22, MX24, MX26, MX28, MX30, MX32, MX34, MX36, MX38 +14 |
| 6 | MountingHole | Lily58-footprint:HOLE_M2_TH | H4, H5, H6, H7, H8, H9 |
| 3 | MountingHole | keyswitches:Stabilizer_MX_2u | H1, H2, H3 |
| 1 | LED-Lily58-cache | Lily58-footprint:LED | J2 |
| 1 | LOGO | Logo:MigiteLogo | G*** |
| 1 | LOGO | Logo:MigiteLogoBack | G*** |
| 1 | OLED | Lily58-footprint:MY_SIL-4 | J1 |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | Rotary_Encoder_Switch | Keebio-Parts:RotaryEncoder_EC11 | SW2 |
| 1 | SW_Push | Keebio-Parts:SW_Tactile_SPST_Angled_MJTP1117 | SW1 |
Questions
How big is the MigitePad PCB?
It measures 139.7 × 134.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MigitePad use?
77 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MigitePad KiCad files?
From the Aleblazer/MigitePad repository on GitHub, at the commit this page was made from: the board is MigitePad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MigitePad design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Aleblazer/MigitePad
1Similar boards
- 2 layers75 × 100 mm
Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530 - 2 layers64 × 55 mm
Zynthiandac
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
77 parts156 - 2 layers44 × 86 mm
Steiner parker vcf
shmoergh/hog
Fully analog two-voice monophonic synth for live performances
77 parts124 - 2 layers94 × 40.6 mm
Multi adapter
osiweb/unified_retro_keyboard
Project to provide keyboard replacements for various classic computers, as well as classic ASCII keyboard
77 parts122 - 2 layers214.9 × 96.1 mm
- 2 layers97.2 × 81.3 mm
Teensythumbboard
AnthonyDiGirolamo/teensy-thumb-keyboard
Handheld tactile switch keyboard for Teensy 3.2 compatible boards.
77 parts93GPL-3.0 - 2 layers39.4 × 43.2 mm
- 2 layers100.3 × 49.1 mm
