Skip to the content
2 layers86 × 109.7 mmKiki player, the printed circuit board in 3D
Size
86 × 109.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
104
Pads
305
Tracks, vias
551, 89
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 May 2026
Updated
17 Jul 2026

Overview

Kiki player is an open-source printed circuit board by alaotach, from the alaotach/kiki-player repository on GitHub. It is a 2-layer board of 86 × 109.7 mm with 46 parts on 104 nets, routed with 551 tracks and 89 vias.

It is built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and DS3231MZ+, with the PCM5102APW and TP4056-42-ESOP8 among its other parts. Its parts include 14 capacitors, 9 resistors, 7 ICs, 5 connectors and 2 diodes. It belongs with the ESP32 boards of this library.

Main components

5

Parts

46
QtyValueFootprintReferences
6100nFCapacitor_SMD:C_0603_1608MetricC9, C16, C17, C18, C19, C21
610uFCapacitor_SMD:C_0603_1608MetricC12, C13, C14, C15, C20, C22
4, , ,
410kResistor_SMD:R_0603_1608MetricR3, R6, R12, R13
2100kResistor_SMD:R_0603_1608MetricR14, R15
212pFCapacitor_SMD:C_0603_1608MetricC7, C8
25.1kResistor_SMD:R_0603_1608MetricR4, R5
2LEDLED_SMD:LED_0603_1608MetricD3, D4
2SW_PushButton_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mmSW3, SW4
11.2kResistor_SMD:R_0603_1608MetricR11
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U8
1AudioPlug3Connector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_HorizontalJ3
1CR2013-MI2120Display:CR2013-MI2120U4
1Conn_01x28_SocketPackage_QFP:TQFP-32_7x7mm_P0.8mmJ2
1Conn_02x01Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ5
1CrystalCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1DS3231MPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU7
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U1
1MAX98357APackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmU6
1PCM5102APackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU5
1SD_Card_DeviceConnector_Card:microSD_HC_Hirose_DM3D-SFJ4
1SpeakerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalLS1
1TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalViasU9
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J6
1VoltageDividerResistor_SMD:R_Array_Convex_2x0603RN2

Similar boards

  • 4 layers70.9 × 75 mmFlagshep Audio Player V1, the printed circuit board in 3D

    Flagshep Audio Player V1

    HYLDAIC/Flagshep-V1_Audio-Player

    A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code

    77 parts1CERN-OHL-P-2.0
  • 2 layers93.5 × 75.5 mmNindo, the printed circuit board in 3D

    Nindo

    saptak70/Nindo-Handheld-gameboy-and-mp3-player--using-esp32

    A custom handheld device built from scratch — PCB, firmware, and enclosure. Plays NES/DOOM, streams audio to BT headphones.

    65 parts
  • 4 layers96 × 60.1 mmCRASHSENSE, the printed circuit board in 3D

    CRASHSENSE

    ParthDhiman32/CRASHSENSE

    Crashsense is a high level embedded sytems project which senses crashes in vehicles like cars trucks and also drones and records the every bit of data of that crash and gives enough data for the crash to be reoncstructed

    56 partsMIT
  • 4 layers41 × 90.2 mmAeropod2, the printed circuit board in 3D

    Aeropod2

    eyendamuri/aeropod

    An esp32 based mp3 player with the ability to play video too.

    67 parts
  • 2 layers55 × 100 mmESP32AY revD2, the printed circuit board in 3D

    ESP32AY revD2

    djspawnbrest/ESP32AY

    ZxPod - ESP32 based AY multiformat player

    138 parts59GPL-3.0
  • 2 layers131.8 × 33 mmYR PCB 0.3.1, the printed circuit board in 3D

    YR PCB 0.3.1

    PROTONMM/YR_0.3.1

    This project includes only the PCB and the enclosure; it does not include any software. MIT License.

    48 parts7MIT
  • 2 layers78 × 58 mmDick mouse, the printed circuit board in 3D

    Dick mouse

    segfau-yama/dxxk_mouse

    ESP32-S3 上で動作する Rust 製 USB 入力デバイスの実験用リポジトリです。

    51 partsMIT
  • 2 layers140 × 80 mmVSPKR1, the printed circuit board in 3D

    VSPKR1

    VinylTechnology/VSPKR1

    Vinyl Speaker 1 | Alexa like Smart speaker

    35 parts

Questions

How big is the Kiki player PCB?

It measures 86 × 109.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kiki player use?

46 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3, DS3231MZ+ and PCM5102APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kiki player KiCad files?

From the alaotach/kiki-player repository on GitHub, at the commit this page was made from: the board is pcb/kiki-player.kicad_pcb and its schematic pcb/battery.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kiki player design in my own project?

Its repository states no licence, so its author keeps all rights: ask alaotach before reusing the design.