
Flagshep Audio Player V1
HYLDAIC/Flagshep-V1_Audio-Player
A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code

Kiki player is an open-source printed circuit board by alaotach, from the alaotach/kiki-player repository on GitHub. It is a 2-layer board of 86 × 109.7 mm with 46 parts on 104 nets, routed with 551 tracks and 89 vias.
It is built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and DS3231MZ+, with the PCM5102APW and TP4056-42-ESOP8 among its other parts. Its parts include 14 capacitors, 9 resistors, 7 ICs, 5 connectors and 2 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C9, C16, C17, C18, C19, C21 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C12, C13, C14, C15, C20, C22 |
| 4 | , , , | ||
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R12, R13 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW3, SW4 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U8 |
| 1 | AudioPlug3 | Connector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal | J3 |
| 1 | CR2013-MI2120 | Display:CR2013-MI2120 | U4 |
| 1 | Conn_01x28_Socket | Package_QFP:TQFP-32_7x7mm_P0.8mm | J2 |
| 1 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | Crystal | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U7 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U6 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | SD_Card_Device | Connector_Card:microSD_HC_Hirose_DM3D-SF | J4 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U9 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J6 |
| 1 | VoltageDivider | Resistor_SMD:R_Array_Convex_2x0603 | RN2 |

HYLDAIC/Flagshep-V1_Audio-Player
A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code

saptak70/Nindo-Handheld-gameboy-and-mp3-player--using-esp32
A custom handheld device built from scratch — PCB, firmware, and enclosure. Plays NES/DOOM, streams audio to BT headphones.

ParthDhiman32/CRASHSENSE
Crashsense is a high level embedded sytems project which senses crashes in vehicles like cars trucks and also drones and records the every bit of data of that crash and gives enough data for the crash to be reoncstructed



PROTONMM/YR_0.3.1
This project includes only the PCB and the enclosure; it does not include any software. MIT License.


It measures 86 × 109.7 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3, DS3231MZ+ and PCM5102APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alaotach/kiki-player repository on GitHub, at the commit this page was made from: the board is pcb/kiki-player.kicad_pcb and its schematic pcb/battery.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alaotach before reusing the design.