

Glucometer pcb
- Size
- 256.6 × 157.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 31
- Pads
- 472
- Tracks, vias
- 416, 0
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Apr 2022
- Updated
- 25 Jun 2022
Overview
Glucometer pcb is an open-source printed circuit board by AlanWendorff, from the AlanWendorff/sch_pcb_glucometer repository on GitHub. It is a 2-layer board of 256.6 × 157.9 mm with 168 parts on 31 nets, routed with 416 tracks and 0 vias.
Its parts include 32 resistors, 8 ICs and 8 diodes. It belongs with the ESP32 boards of this library.
README
README.mdSCH - PCB glucometer
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | GND2, GND2, GND2, GND2, GND2, GND2, GND2, GND2, SCL1, SCL1, SCL1, SCL1, SCL1, SCL1, SCL1, SCL1 +16 |
| 24 | TestPoint | TestPoint:TestPoint_Keystone_5015_Micro-Minature | 3V3_OUT1, 3V3_OUT1, 3V3_OUT1, 3V3_OUT1, 3V3_OUT1, 3V3_OUT1, 3V3_OUT1, 3V3_OUT1, GND1, GND1, GND1, GND1, GND1, GND1, GND1, GND1 +8 |
| 16 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R1, R1, R1, R1, R1, R1, R1, R4, R4, R4, R4, R4, R4, R4, R4 |
| 8 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R3, R3, R3, R3, R3, R3, R3 |
| 8 | 27K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R2, R2, R2, R2, R2, R2, R2 |
| 8 | Battery_Cell | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | BATTERY1, BATTERY1, BATTERY1, BATTERY1, BATTERY1, BATTERY1, BATTERY1, BATTERY1 |
| 8 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABI-009-RC | BZ1, BZ1, BZ1, BZ1, BZ1, BZ1, BZ1, BZ1 |
| 8 | CAP | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | 100nF1, 100nF1, 100nF1, 100nF1, 100nF1, 100nF1, 100nF1, 100nF1 |
| 8 | EMITTER | LED_THT:LED_D3.0mm_Clear | D1, D1, D1, D1, D1, D1, D1, D1 |
| 8 | ESP32_DevKit_V1_DOIT | esp32_devkit_v1_doit:esp32_devkit_v1_doit | U1, U1, U1, U1, U1, U1, U1, U1 |
| 8 | SW_Push | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | INTERRUPT_GPIO1, INTERRUPT_GPIO1, INTERRUPT_GPIO1, INTERRUPT_GPIO1, INTERRUPT_GPIO1, INTERRUPT_GPIO1, INTERRUPT_GPIO1, INTERRUPT_GPIO1 |
The 136 most common of 168 parts.
More from AlanWendorff/sch_pcb_glucometer
1- 2 layers256.9 × 148.5 mm

Similar boards
- 2 layers344.4 × 130.8 mm

- 2 layers284.7 × 94.2 mm

- 2 layers102 × 102 mm

- 2 layers85 × 40 mm

SnapNodes RP2
shBLOCK/TileGlobeMC
Project Structure ----- - tileglobe: game logic - datagen/mod: a fabric modding environment for extracting/generating data from vanilla (e.g.
168 parts21 - 2 layers100 × 110 mm

- 2 layers100 × 100 mm

Mcu
cs2dsb/coffee_assistant
Free and open source software distributed under the terms of both the [MIT License][lm] and the [Apache License 2.0][la].
168 parts10Apache-2.0 - 2 layers265.7 × 87.7 mm

Corne choc
idank/keyboards
This repo contains pcb and 3d files for keyboards. The keyboards are adaptations of popular open source keyboards with a variety of changes.
168 parts10CC-BY-SA-4.0 - 2 layers312.3 × 119 mm

Questions
How big is the Glucometer pcb PCB?
It measures 256.6 × 157.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Glucometer pcb use?
168 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glucometer pcb KiCad files?
From the AlanWendorff/sch_pcb_glucometer repository on GitHub, at the commit this page was made from: the board is peripherals/glucometer-pcb.kicad_pcb and its schematic peripherals/glucometer-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glucometer pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlanWendorff before reusing the design.