2 layers256.6 × 157.9 mm
2 layers256.9 × 148.5 mm
Glucometer pcb
AlanWendorff/sch_pcb_glucometer- Size
- 256.9 × 148.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 252
- Nets
- 17
- Pads
- 636
- Tracks, vias
- 1,440, 0
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Apr 2022
- Updated
- 25 Jun 2022
Overview
Glucometer pcb is an open-source printed circuit board by AlanWendorff, from the AlanWendorff/sch_pcb_glucometer repository on GitHub. It is a 2-layer board of 256.9 × 148.5 mm with 252 parts on 17 nets, routed with 1,440 tracks and 0 vias.
It is built around the RC4558IPW and LM1458N. Its parts include 84 resistors and 36 capacitors.
Main components
2
RC4558IPW
TSSOP-8-15V~-5V、5V~15V -40℃~+85℃ 1.7V/us 150nA 2 200nA 3MHz 3mA 6mV 8nV/√Hz@1kHz 90dB Built-in compensation TSSOP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
LM1458N
PDIP-8-18V~18V 0℃~+70℃ 2 200nA 3mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
README
README.mdSCH - PCB glucometer
Parts
252| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | TestPoint | TestPoint:TestPoint_Keystone_5015_Micro-Minature | GND1, GND1, GND1, GND1, GND1, GND1, GND1, GND1, GND1, GND1, GND1, GND1, S_OUT1, S_OUT1, S_OUT1, S_OUT1 +20 |
| 24 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R7, R7, R7, R7 +8 |
| 24 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R3, R3, R3, R3 +8 |
| 24 | 300k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R5, R5, R5, R5 +8 |
| 24 | RC4558IP | Custom:DIP794W53P254L959H508Q8N | RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP1, RC4558IP2, RC4558IP2, RC4558IP2, RC4558IP2 +8 |
| 12 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2 |
| 12 | 15p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 |
| 12 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R6, R6, R6, R6, R6, R6, R6, R6, R6, R6, R6 |
| 12 | 1u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3 |
| 12 | D_Photo | LED_SMD:LED_2512_6332Metric | RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1, RECEPTOR_DIODE1 |
| 12 | LM1458N | Custom:MC1458N | LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1, LM1458N1 |
The 204 most common of 252 parts.
More from AlanWendorff/sch_pcb_glucometer
1Similar boards
- 2 layers85 × 49 mm
2db per div
benishor/w7zoi-sa-2dB-per-div
2dB per division mod for W7ZOI/K7TAU spectrum analyzer.
27 parts - 2 layers231 × 126.8 mm
Esquematico HealthBand
impatrq/healthband
La incorporación de un Bot de Telegram 💬 permitirá recibir alertas, consultar el estado de salud e información general.
96 parts - 2 layers48.4 × 73.7 mm
- 2 layers202 × 85 mm
Instru bab v2 full
trublion/Boite_a_bourdon_control_board
HW control board for motorised hurgy-gurdy. Controls a DC motor with a half-H-bridge, reads an analog audio signal envelope, dual-PCB design.
147 partsMIT - 2 layers80.9 × 111.8 mm
- 2 layers359.7 × 231.5 mm
- 2 layers74.9 × 77.5 mm
- 2 layers100 × 100 mm
Zxevo1010 main
UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
252 parts26
Questions
How big is the Glucometer pcb PCB?
It measures 256.9 × 148.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Glucometer pcb use?
252 parts, built around the RC4558IPW and LM1458N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glucometer pcb KiCad files?
From the AlanWendorff/sch_pcb_glucometer repository on GitHub, at the commit this page was made from: the board is receptor_circuit/glucometer-pcb.kicad_pcb and its schematic peripherals/glucometer-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glucometer pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlanWendorff before reusing the design.