aladds/rePalm-SDIO1RePalm SDIO is an open-source printed circuit board by aladds, from the aladds/rePalm-SDIO repository on GitHub. It is a 4-layer board of 50 × 24 mm with 19 parts on 60 nets, routed with 510 tracks and 51 vias.
It is built around the STM32H7B0RBT6, S25FL064LABMFN010 and APS6404L-3SQR-SN. Its parts include 4 ICs, 4 connectors, 2 capacitors, 1 resistor and 1 inductor. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C_SD1, C1_1, C1_2, C1_3, C1_4, C2, C3 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C4_2 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C4_1 |
| 1 | 50K | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | APS6404L-3SQR-SN | stm32:BACKWARDS-SOIC-8_5.275x5.275mm_P1.27mm | U3 |
| 1 | BootRST | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | L | Inductor_SMD:L_2010_5025Metric | L4 |
| 1 | LTC3406BES5-1.2 | Package_TO_SOT_SMD:TSOT-23-5 | U4 |
| 1 | S25FL064LABMFN010 | stm32:BACKWARDS-SOIC-8_5.275x5.275mm_P1.27mm | U2 |
| 1 | SD Connector | stm32:SD-Connector | J1 |
| 1 | STM32H7B0RBT6 | LQFP_B0VBT6_STM:STM32H7B0RBT6_UpsideDown | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
It measures 50 × 24 mm and has 4 copper layers, 4.69 mm thick.
19 parts, built around the STM32H7B0RBT6, S25FL064LABMFN010 and APS6404L-3SQR-SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the aladds/rePalm-SDIO repository on GitHub, at the commit this page was made from: the board is rePalm-SDIO/rePalm-SDIO.kicad_pcb and its schematic rePalm-SDIO/rePalm-SDIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask aladds before reusing the design.
Nautilus-UUV/nautilus-mainboard-PCB
Additionally the mainboard provides two IMUs (BMI088) that can be accessed over I^2C by the STM32. Those components house accelerometers and gyroscopes for orientation and movement detection and listen to the following…
emb3rcia/stm32-module
My first MCU module! Made for HackClub's Blueprint! Supports USB-C and gives 66 gold pins, 2 of which are 1.8V!
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
mole99/qspi-pmod
A QSPI Pmod board designed in KiCad containing one Flash and two SPRAMs
