Skip to the content
2 layers88.9 × 50.8 mmBlinkencard, the printed circuit board in 3D

FPGA based blinky computer emulator

Size
88.9 × 50.8 mm
Copper layers
2
Thickness
1 mm
Parts
105
Nets
102
Pads
414
Tracks, vias
1,288, 280
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Nov 2019
Updated
17 Jun 2025

Overview

Blinkencard is an open-source printed circuit board by al177, from the al177/blinkencard repository on GitHub, published under the MIT licence. It is a 2-layer board of 88.9 × 50.8 mm with 105 parts on 102 nets, routed with 1,288 tracks and 280 vias.

It is built around the ICE40UP5K-SG48ITR50, ESP32-WROOM-32 and AP7361C-33E, with the MIC5504-1.2YM5-TR, BC847 and B120-E3 among its other parts. Its parts include 42 diodes, 19 capacitors, 19 resistors, 6 transistors and 5 ICs. It belongs with the ESP32 and FPGA and CPLD boards of this library.

Main components

7

README

README.md

blinkencard

FPGA based blinky computer emulator

Parts

105
QtyValueFootprintReferences
40LED_Smallblinkencard:LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mmD10, D11, D12, D13, D14, D15, D16, D17, D20, D21, D22, D23, D24, D25, D26, D27 +24
810KResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R9, R20
8270Resistor_SMD:R_0603_1608MetricR10, R11, R12, R13, R14, R15, R16, R17
70.1uFCapacitor_SMD:C_0603_1608MetricC3, C4, C6, C8, C9, C10, C18
710.0uFCapacitor_SMD:C_0805_2012MetricC5, C11, C14, C15, C16, C17, C19
5BC847Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5
31.0uFCapacitor_SMD:C_0805_2012MetricC7, C12, C13
20.01uFCapacitor_SMD:C_0603_1608MetricC1, C2
2GNDTestPoint:TestPoint_Pad_D1.5mmTP2, TP7
1+5VTestPoint:TestPoint_Pad_D1.5mmTP1
10Button_Switch_SMD:SW_SPST_PTS645SW1
11Button_Switch_SMD:SW_SPST_PTS645SW2
1100Resistor_SMD:R_0603_1608MetricR8
1100KResistor_SMD:R_0603_1608MetricR7
11KResistor_SMD:R_0603_1608MetricR18
1AP7361C-33EPackage_TO_SOT_SMD:SOT-223-3_TabPin2U3
1B120-E3Diode_SMD:D_SMAD1
1Conn_01x02Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ3
1Conn_02x04_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_SMDJ2
1DMG2301LPackage_TO_SOT_SMD:SOT-23Q6
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U2
1ICE40UP5K-SG48ITRPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalViasU1
1IOT_42bTestPoint:TestPoint_Pad_D1.5mmTP4
1IOT_43aTestPoint:TestPoint_Pad_D1.5mmTP5
1IOT_44bTestPoint:TestPoint_Pad_D1.5mmTP6
1LED_SmallLED_SMD:LED_0805_2012MetricD2
1LEFTButton_Switch_SMD:SW_SPST_PTS645SW3
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U5
1MIC5504-1.2YM5Package_TO_SOT_SMD:SOT-23-5U4
1RIGHTButton_Switch_SMD:SW_SPST_PTS645SW4
1SW_SPSTButton_Switch_SMD:SW_SPDT_CK-JS102011SAQNSW5
1USB_B_Microblinkencard:USB_Micro-B_Molex-105017-0001J1

Similar boards

  • 2 layers85 × 56 mmAT01, the printed circuit board in 3D

    AT01

    hshahzada/automated-tourniquet

    2023/2024 Capstone Design Project for Biomedical Engineering

    72 parts
  • 4 layers100 × 75 mmProgrammaGull Sandpiper, the printed circuit board in 3D

    ProgrammaGull Sandpiper

    4n3m4i1/PG_Logic

    Open Source FPGA Development Boards for Education and Deeply Embedded Applications

    214 partsMIT
  • 4 layers99.1 × 83.8 mmIbm-5151-pcb, the printed circuit board in 3D

    Ibm-5151-pcb

    asinghani/ibm-5151-controller

    Building a VT100 emulator out of an IBM 5151 monitor and an FPGA

    85 partsMIT
  • 2 layers25.6 × 0 mmIce40 wearable v1, the printed circuit board in 3D

    Ice40 wearable v1

    asinghani/ice40-wearable

    iCE40 FPGA boards in wearable form-factors

    63 parts
  • 6 layers73 × 100 mmETH3CADC1, the printed circuit board in 3D

    ETH3CADC1

    koson/ETH3CDAQ1

    407 parts
  • 2 layers45.7 × 63.5 mmFeuchtraumabzweigdose, the printed circuit board in 3D

    Feuchtraumabzweigdose

    transportkollektiv/feuchtraumabzweigdose

    A custom GPS Tracker with LoRaWAN/TTN intended for use on a bicycle

    40 parts14CC-BY-4.0
  • 4 layers125.8 × 48 mmBLUETOOTH SPEAKER, the printed circuit board in 3D

    BLUETOOTH SPEAKER

    mbeayou/esp32-hifi-bluetooth-speaker-pcb-board

    A custom high-fidelity Bluetooth speaker PCB featuring the ESP32 (I2S), PCM5100 DAC, and TPA3116D2 Class D Amplifier. Includes Schematics, Gerber files, and BOM.

    115 parts3MIT
  • 2 layers44.3 × 46.3 mmCatear pcb, the printed circuit board in 3D

    Catear pcb

    TobleMiner/catear-pcb

    This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.

    121 parts1

Questions

How big is the Blinkencard PCB?

It measures 88.9 × 50.8 mm and has 2 copper layers, 1 mm thick.

What parts does the Blinkencard use?

105 parts, built around the ICE40UP5K-SG48ITR50, ESP32-WROOM-32, AP7361C-33E and MIC5504-1.2YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Blinkencard KiCad files?

From the al177/blinkencard repository on GitHub, at the commit this page was made from: the board is kicad/blinkencard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Blinkencard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).