Skip to the content
2 layers59 × 36 mmAstable Multivibrator, the printed circuit board in 3D

A through-hole KiCad project implementing an astable multivibrator using a NE555 timer in DIP-8 format. The board generates a blinking output signal and includes an LED indicator plus external terminal connections for…

Size
59 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
7
Pads
24
Tracks, vias
84, 4
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 May 2026
Updated
19 May 2026

Overview

Astable Multivibrator is an open-source printed circuit board by akshat-kumar10, from the akshat-kumar10/astable-multivibrator-pcb repository on GitHub. It is a 2-layer board of 59 × 36 mm with 9 parts on 7 nets, routed with 84 tracks and 4 vias.

It is built around the NE555P. Its parts include 3 resistors, 2 capacitors, 2 connectors, 1 IC and 1 diode.

Main components

1

README

README.md

Astable Multivibrator (NE555 Timer)

A through-hole KiCad project implementing an astable multivibrator using a NE555 timer in DIP-8 format. The board generates a blinking output signal and includes an LED indicator plus external terminal connections for power and signal output.

Overview

  • Circuit type: Astable multivibrator
  • IC: NE555P (DIP-8)
  • Supply: DC power input via 2-pin terminal block (J1)
  • Output: 2-pin terminal block (J2) provides the NE555 output and ground reference
  • Board type: 2-layer PCB, 1.6 mm thickness, through-hole components

Key Components

  • U1 — NE555P timer, Package_DIP:DIP-8_W7.62mm
  • R1 — 2 kΩ resistor, Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal
  • R2 — 146 kΩ resistor, Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal
  • R3 — 560 Ω resistor, Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal
  • C1 — 10 µF electrolytic capacitor, Capacitor_THT:CP_Radial_D5.0mm_P2.00mm
  • C2 — 0.1 µF bypass capacitor, Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm
  • D1 — LED indicator, LED_THT:LED_D5.0mm
  • J1 — 2-pin Phoenix terminal block for power input, TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08mm_Horizontal
  • J2 — 2-pin Phoenix terminal block for output and ground, same footprint as J1

Connector Pinout

  • J1 — Power input
    • Pin 1: GND
    • Pin 2: VCC
  • J2 — Output terminal
    • Pin 1: Output (NE555 pin 3)
    • Pin 2: GND

Project Files

  • Astable_Multivibrator.kicad_sch — Schematic file
  • Astable_Multivibrator.kicad_pcb — PCB layout file
  • Astable_Multivibrator.kicad_prl — PCB print settings
  • Astable_Multivibrator.kicad_pro — Project settings
  • DRC.rpt — Design rule check report
  • report.txt — Schematic validation / netlist report
  • Gerbers/ — Generated Gerber outputs for fabrication
  • Gerbers.zip — Archive of the Gerber files
image

Usage

  1. Open Astable_Multivibrator.pro in KiCad (recommended KiCad 10 or later).
  2. Review the schematic and PCB layout for your chosen component footprints.
  3. Run ERC in Eeschema and DRC in Pcbnew before fabrication.
  4. Export Gerbers from the Gerbers/ folder or regenerate them as needed.

Notes

  • The board is designed for standard through-hole assembly.
  • Component placement and routing are built for a simple low-frequency blinking oscillator.
  • Verify supply voltage compatibility for the NE555 and LED before connecting power.

Parts

9
QtyValueFootprintReferences
2Conn_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1, J2
10.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2
110uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
1146KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
12KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1560Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1LEDLED_THT:LED_D5.0mmD1
1NE555PPackage_DIP:DIP-8_W7.62mmU1

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Questions

How big is the Astable Multivibrator PCB?

It measures 59 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Astable Multivibrator use?

9 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Astable Multivibrator KiCad files?

From the akshat-kumar10/astable-multivibrator-pcb repository on GitHub, at the commit this page was made from: the board is Astable_Multivibrator.kicad_pcb and its schematic Astable_Multivibrator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Astable Multivibrator design in my own project?

Its repository states no licence, so its author keeps all rights: ask akshat-kumar10 before reusing the design.