

Universal Battery Meter
- Size
- 49.5 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 54
- Pads
- 225
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 23 Mar 2014
- Updated
- 6 Dec 2015
Overview
Display is an open-source printed circuit board by akornsys-rdi, from the akornsys-rdi/universal-battery-meter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 49.5 × 49.5 mm with 74 parts on 54 nets.
It is built around the 74HC595 and SC56-11EWA. Its parts include 30 resistors, 15 diodes, 8 capacitors, 7 transistors and 3 switches. It belongs with the lEDs and displays boards of this library.
Main components
2README
README.mduniversal-battery-meter
Universal Battery Meter
_ _ ___ __ __
| | | | _ ) \/ |
| |_| | _ \ |\/| |
\___/|___/_| |_| Project developed by kwendenarmo (devel@kwendenarmo.es).
This project is under GPLv3 licence. See COPYING file.
See CHANGELOG file to check the history of dates, versions and changes.
README.md file.
Version
Versión 2.0.0 "devel"
Cambios
Reimplementación del branch old-v1, con funcionalidades añadidas:
- Hardware dividido en tres bloques:
- Display
- Muestra datos a través de cuatro display 7seg.
- Cuatro LED de modo (V, A, Ah, ºC) para indicar qué tipo de dato se está mostrando en display.
- Diez led para escala analógica (RGGGGYYYRR).
- Un buzzer con soporte para tonos.
- Tres pulsadores (unit, set, mode) que permite cambiar la unidad mostrada en display y modificar la configuración de control.
- El display usa entrada de 9 pines:
DS_VCC,DS_MOSI,DS_SCK,DS_SS,DS_BUZ,DS_UNT,DS_MOD,DS_SET,DS_GND. VCC de 5V - Todos los LED (7seg e individuales) van multiplexados a través de SPI (Primer byte ánodo, Segundo byte cátodos comunes).
- El sistema incluye un power-on-reset para limpiar los registros del SPI.
- La entrada del buzzer se ataca directamente a través de un fet.
- Los tres pulsadores llevan un anti-rebotes por hardware.
- Control
- Basado en ATmega328 a 16MHz
- Conexión directa al display, mediante zócalo.
- Cabecera de ISP.
- EEPROM SPI (bus compartido) para log.
- Conector de salidas de drenador abierto para media potencia. Salidas:
STAT_FULL,STAT_FLOAT,STAT_FAIL,OUT_CHARGE,OUT_DISCHARGE. - Conector de comunicaciones mediante RS485 con pull y terminador. Válido para programación.
- Conector de sonda mediante RS485 con pull y terminador. Incorpora alimentación regulada.
- Permite múltiples sondas en cascada.
- Autodetección de la sonda
- Alimentación de módulo a 12-36vdc
- Monitorización de tensiones en entrada y VCC
- Sonda
- Módulos en rangos de tensión y corriente admitida.
- Basado en ATmega 328 a 16MHz
- Conexión RS485 con el módulo principal.
- Selector de terminador.
- Conector de sonda para sondas en cascada.
- Medida de tensión.
- Medida de corriente.
- Conector para sonda de temperatura.
- Sensor de temperatura incorporado en el cuerpo de la sonda.
- Display
Usos:
- Logger
- Charger
- Discharger
- Monitor
- Voltmeter
- Ammeter
- Capacity meter
Librerias:
- datelib
- modbus??
Formfactor:
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220R | Resistors_SMD:R_0805_HandSoldering | R4, R5, R6, R7, R8, R9, R10, R11 |
| 7 | 100R | Resistors_SMD:R_0805_HandSoldering | R2, R12, R14, R16, R18, R20, R22 |
| 7 | 100k | Resistors_SMD:R_0805_HandSoldering | R3, R13, R15, R17, R19, R21, R23 |
| 7 | 2N7002 | Transistors_SMD:sot23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 7 | RED | LEDs:LED-0805 | D3, D11, D12, D13, D14, D15, D16 |
| 5 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R26, R27, R29, R30 |
| 4 | GREEN | LEDs:LED-0805 | D4, D5, D6, D7 |
| 4 | SC56-11EWA | 41SRWA:41SRWA | DS1, DS2, DS3, DS4 |
| 3 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C5, C6, C9 |
| 3 | 560R | Resistors_SMD:R_0805_HandSoldering | R24, R25, R28 |
| 3 | SW_PUSH | SKQG180836:SKQG-180836 | SW1, SW2, SW3 |
| 3 | YELLOW | LEDs:LED-0805 | D8, D9, D10 |
| 2 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C1, C8 |
| 2 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C3, C4 |
| 2 | 74HC595 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1, U2 |
| 2 | VAL** | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | Measurement_Point_Round-SMD-Pad_Big, Measurement_Point_Round-SMD-Pad_Big |
| 1 | 10uF | Capacitors_SMD:c_elec_4x5.3 | C7 |
| 1 | 1N914 | Diodes_SMD:Diode_SOT23_Handsoldering | D1 |
| 1 | BUZZER | AST1575BMATRQ:AST1575BMATRQ | LS1 |
| 1 | CONN_01X09 | Pin_Headers:Pin_Header_Straight_1x09 | P1 |
| 1 | VAL** | Symbols:Symbol_OSHW-Logo_SilkScreen | Symbol_OSHW-Logo_SilkScreen |
More from akornsys-rdi/universal-battery-meter
1- 2 layers

Similar boards
- 2 layers140 × 90 mm

- 2 layers45.7 × 31.8 mm

LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers228.6 × 100 mm

Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers100 × 95.1 mm

Protoboard-6x4-breakout
electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts
4,745 parts311CC-BY-4.0 - 4 layers140 × 100 mm

Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 2 layers100.5 × 218.3 mm

- 2 layers287.8 × 126.7 mm

Questions
How big is the Display PCB?
It measures 49.5 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Display use?
74 parts, built around the 74HC595 and SC56-11EWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Display KiCad files?
From the akornsys-rdi/universal-battery-meter repository on GitHub, at the commit this page was made from: the board is brd/display/display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Display design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).