

Robust and easy-to-use introduction-to-robotics platform
- Size
- 47.6 × 90.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 66
- Pads
- 300
- Tracks, vias
- 1,048, 62
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Sep 2015
- Updated
- 29 Feb 2016
Overview
Roben is an open-source printed circuit board by akornsys-rdi, from the akornsys-rdi/robgednaut repository on GitHub. It is a 2-layer board of 47.6 × 90.2 mm with 92 parts on 66 nets, routed with 1,048 tracks and 62 vias.
It is built around the LM2902N, LM3488MM and SN754410NE, with the B340, AT-1224-TWT-5V-2-R and BC856 among its other parts. Its parts include 31 resistors, 21 diodes, 11 connectors, 10 capacitors and 4 ICs. It belongs with the robots and motor control boards of this library.
Main components
8LM2902N
DIP-14-15V~-1.5V、1.5V~15V -40℃~+85℃ 1.3MHz 20nA 2mV 2nA 3V~30V 4 400V/ms 40mA 40nV/√Hz@1kHz 700uA 7uV/℃ 80dB DIP-14 Operational Amplifier ROHSHGSEMIOperational AmplifierLM3488MM
VSSOP-8-0.65mm-40℃~+125℃@(TJ) 1 1MHz 2.97V~40V Boost Boost、SEPIC、Flyback External No VSSOP-8-0.65mm DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSN754410NE
PDIP-16-40℃~+85℃ 1A 4.5V~36V 4.5V~5.5V Bipolar Driver Over temperature protection、Dead-time / shoot-through protection PDIP-16 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverB340
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 40V 500mV@3A 500uA@40V SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesAT-1224-TWT-5V-2-R
插件,D=12mm-30℃~+70℃ 12mm 2.4kHz 3V~7V 40mA 5V 6.5mm 87dB 9.3mm Electromagnetic Passive (Externally Driven) Through-hole 插件,D=12mm Buzzers ROHSPUI Audio, Inc.BuzzersBC856
SOT-23-65℃~+150℃ 1 PNP 100MHz 100mA 125 15nA 250mW 300mV 5V 65V PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BUK7Y98-80E
-- MOSFETs ROHSNexperiaMOSFETsSD2114S040S8R0
SMB(DO-214AA)40V 500uA@40V 550mV@8A 8A SMB(DO-214AA) Schottky Diodes ROHSKyocera AVXSchottky Diodes
README
README.mdrobgednaut
Robust and easy-to-use introduction-to-robotics platform
___ _
| _ \___| |__ ___ _ _
| / _ \ '_ \/ -_) ' \
|_|_\___/_.__/\___|_||_|
Robgednaut (from Robotic, Rugged, and -naut [like astronaut]), commonly Roben, it's a simple hardware platform for the introduction to robotics. Use an Arduino Nano to provide four multifunction connections. Also has ability to move up to two motors with the replaceable driver included. It can be used stand-alone or controlled from a computer, also it has numerous protections so you don't have to worry about if you break it!
Robgednaut is free software/hardware. See License Information below.
Repository Contents
/img/: Graphic resources used --if not told otherwise-- as part of the documentation./3d/3D design source code./3d/bin/Files resulting from the compilation of 3D designs (STLfiles).
/brd/Hardware source code./brd/bin/Files resulting from the compilation of hardware (PDFand Gerber files).
/src/Firmware source code./src/bin/Files resulting from the compilation of code (HEXfiles).
Robgednaut can be obtained on GitHub: Robgednaut.
Installation and use
Roben is very easy to use! You just need a Arduino Nano with the firmware we
provide (compatible with firmata) or your own, your Robgednaut, and a power
supply (3 to 32v max). Connect things to their I/O and enjoy making it work!
It can be managed from Scratch by Firmata gateway, or from your own software.
Warning: Make sure you have the proper firmware BEFORE you connect your Arduino Nano to Robgednaut. Not doing so may damage your Arduino.
Pinout
| Robgednaut | Arduino | Function |
|---|---|---|
| +V | - | 5v power out |
| GND | GND | Ground |
| A | D2, A7 | Analog input, digital I/O, INT |
| B | D3, A6 | Analog input, digital I/O, INT, PWM |
| C | D13, A4 | Analog input, digital I/O, SDA, SCK |
| D | D11, A5 | Analog input, digital I/O, PWM, SCL, MOSI |
| 1+ | D8 (en), D10 (PWM) | Half H-Bridge 1 output |
| 1- | D7 (en), D5 (PWM) | Half H-Bridge 1 output |
| 2+ | D8 (en), D9 (PWM) | Half H-Bridge 2 output |
| 2- | D7 (en), D6 (PWM) | Half H-Bridge 2 output |
| Internal | D4 | Piezo buzzer |
| Internal | D12 | Red LED |
| Internal | A0 | Yellow LED |
| Internal | A1 | Green LED |
| Internal | A2 | Push button |
| Internal | A3 | Push button |
License Information
Firmware released under
GNU/GPL.
See /src/ folder.
The hardware design is released under
GNU/GPL.
See /brd/ folder.
Source code hardware is considered any file created and stored by the CAD tool
with design information. To KiCAD are mainly SCH, NET, KICAD_PCB files
and associated.
Binary hardware is considered any file created from source code. To KiCAD they
are mainly PDF, CSV files and manufacturing files (e.g. gerber).
Binary hardware execution is considered any process derived from binary
hardware, such as manufacturing.
The 3D designs are released under
GNU/GPL.
See /3d/ folder.
Source code 3D is considered any file created and stored by the CAD tool with
design information. To OpenSCAD are mainly SCAD files.
Binary 3D is considered any file created from source code. To OpenSCAD they are
mainly rendering and manufacturing files (e.g. STL).
Binary 3D execution is considered any process derived from binary 3D, such as
manufacturing.
See the corresponding COPYING file.
Version History
Robgednaut uses Semantic Versioning.
Robgednaut version v2.0.0 is the latest stable version.
If you are interested, you can view the version history:
ChangeLog
Contribute
Feel free to submit bugs or patches, feature requests, etc. using GitHub issues and Pull Requests
You can read the information about the developers:
AUTHORS
Last modification: 2016-02-03
This file was automatically generated by KodeUtils 1.0.2
Copyright (C) 2015-2016 kwendenarmo. This file is part of Robgednaut
Robgednaut is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version.
Robgednaut is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details
You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 220R | Resistors_SMD:R_0805_HandSoldering | R10, R11, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31 +1 |
| 9 | ORANGE | LEDs:LED-0805 | D7, D8, D9, D10, D12, D16, D17, D20, D21 |
| 7 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R3, R5, R7, R12, R13, R17 |
| 4 | 5V1 | Diodes_SMD:SOD-123 | D14, D15, D18, D19 |
| 3 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C2, C9, C10 |
| 2 | +V | Wire_Pads:SolderWirePad_single_2-5mmDrill | J7, J9 |
| 2 | 470uF | Capacitors_SMD:c_elec_8x10 | C7, C8 |
| 2 | B340 | Diodes_SMD:Diode-SMC_Handsoldering | D2, D13 |
| 2 | GND | Wire_Pads:SolderWirePad_single_2-5mmDrill | J8, J10 |
| 2 | SW_PUSH | asrdi-switch:FSMxxJxH | SW2, SW3 |
| 1 | 1+ | Wire_Pads:SolderWirePad_single_2-5mmDrill | J3 |
| 1 | 1- | Wire_Pads:SolderWirePad_single_2-5mmDrill | J4 |
| 1 | 1.5A PPTC | Fuse_Holders_and_Fuses:Fuse_SMD2920 | F1 |
| 1 | 1.6nF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 100R | Resistors_SMD:R_0805_HandSoldering | R14 |
| 1 | 10uF | Capacitors_SMD:c_elec_5x5.3 | C1 |
| 1 | 154k | Resistors_SMD:R_0805_HandSoldering | R8 |
| 1 | 18k | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 18m | asrdi-discrete:0612 | R15 |
| 1 | 1k96 | Resistors_SMD:R_0805_HandSoldering | R9 |
| 1 | 2+ | Wire_Pads:SolderWirePad_single_2-5mmDrill | J5 |
| 1 | 2- | Wire_Pads:SolderWirePad_single_2-5mmDrill | J6 |
| 1 | 2.4nF | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | 20R | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 22uH | asrdi-discrete:coil-12x12h10 | L1 |
| 1 | 29k4 | Resistors_SMD:R_0805_HandSoldering | R16 |
| 1 | 390nF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 4.7uF | Capacitors_SMD:C_1206_HandSoldering | C6 |
| 1 | 68uH | asrdi-discrete:coil-13x13H7 | L2 |
| 1 | A | Wire_Pads:SolderWirePad_single_2-5mmDrill | J11 |
| 1 | AT-1224-TWT-5V-2-R | asrdi-buzzer:AT-1224-TWT-5V-2-R | LS1 |
| 1 | Ardunano | asrdi-socket:Ardunano | U1 |
| 1 | B | Wire_Pads:SolderWirePad_single_2-5mmDrill | B |
| 1 | BC856 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23_Handsoldering | Q2 |
| 1 | BLUE | LEDs:LED-0805 | D6 |
| 1 | BT HC-05 | asrdi-socket:HC-05 | J2 |
| 1 | BUK7Y98 | Power_Packages_SMD:SOT-669_LFPAK_ThermalVias-1 | Q1 |
| 1 | C | Wire_Pads:SolderWirePad_single_2-5mmDrill | C |
| 1 | D | Wire_Pads:SolderWirePad_single_2-5mmDrill | D |
| 1 | GREEN | LEDs:LED-0805 | D4 |
| 1 | LM2902N | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U4 |
| 1 | LM3488 | Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mm | U2 |
| 1 | LOGO | asrdi-heatsink:roben | G1 |
| 1 | POWER IN | asrdi-conn:combo-barrel5.5x2.1-2p5.08 | J1 |
| 1 | POWER ON | asrdi-switch:JS202011SCQN | SW1 |
| 1 | RED | LEDs:LED-0805 | D1 |
| 1 | SD2114S040S8R0 | Diodes_SMD:Diode-SMB_Handsoldering | D5 |
| 1 | SN754410N | Housings_DIP:DIP-16__300_ELL | U3 |
| 1 | TCMBD914 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23_Handsoldering | D11 |
| 1 | VSEL | asrdi-conn:M20-87703xx | JP1 |
| 1 | YELLOW | LEDs:LED-0805 | D3 |
The 91 most common of 92 parts.
Similar boards
- 2 layers80 × 100 mm

- 4 layers229 × 157 mm

- 2 layers104.1 × 73.7 mm

19V 10A Standalone
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
35 parts - 2 layers61.2 × 128.5 mm

- 2 layers49.5 × 49.5 mm

- 2 layers363.2 × 200 mm

- 2 layers46.6 × 36.2 mm

Cold start power supply
whitfijs-jw/Volvo240-DigitalDash
Volvo 240 Digital Dash Project. It's not much, but its honest work.
29 parts72MIT - 2 layers46 × 23 mm

Questions
How big is the Roben PCB?
It measures 47.6 × 90.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Roben use?
92 parts, built around the LM2902N, LM3488MM, SN754410NE and B340. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Roben KiCad files?
From the akornsys-rdi/robgednaut repository on GitHub, at the commit this page was made from: the board is brd/roben.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Roben design in my own project?
Its repository states no licence, so its author keeps all rights: ask akornsys-rdi before reusing the design.

