
Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
Tracker basado en Arduino + GPS + RFM95W (LoRa)
Lora node rfm95 minipro is an open-source printed circuit board by akirasan, from the akirasan/LoRaWAN-tracker-TTNmapper repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 90.1 × 45.1 mm with 27 parts on 21 nets, routed with 381 tracks and 62 vias.
It is built around the LMS8117AMP-3.3, RFM95W-868S2 and WS2812B. Its parts include 5 diodes, 3 ICs, 3 connectors, 2 capacitors and 2 resistors. It belongs with the radio and wireless boards of this library.
Tracker basado en Arduino Mini Pro + GPS + RFM95W (LoRa) Podéis encontrar toda la info del proyecto en http://akirasan.net/nodo-de-mapeo-ttnmapper-arduino-gps-lorawan
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED1, LED2, LED3 |
| 2 | Val** | lora_node_rfm95_minipro:akirasan_logo | Ref**, Ref** |
| 1 | lora_node_rfm95_minipro:arduino_small_logo | ||
| 1 | lora_node_rfm95_minipro:calles_ok | ||
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.29x1.40mm_HandSolder | C1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.29x1.40mm_HandSolder | R1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.29x1.40mm_HandSolder | R2 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.29x1.40mm_HandSolder | C3 |
| 1 | ARD-PRO-MINI-5 | lora_node_rfm95_minipro:ARDPROMINI5_SMD | IC1 |
| 1 | Conn_ANT | lora_node_rfm95_minipro:SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | Conn_BAT | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1 |
| 1 | Conn_GPS | lora_node_rfm95_minipro:GPS_module_SMD | J3 |
| 1 | D_Schottky_ALT | Diode_SMD:D_1206_3216Metric_Pad1.22x1.80mm_HandSolder | D1 |
| 1 | LED | Diode_SMD:D_0805_2012Metric_Pad1.12x1.40mm_HandSolder | D2 |
| 1 | LMS8117AMP-3.3 | lora_node_rfm95_minipro:SOT230P696X180-4N | U2 |
| 1 | RFM95W-868S2 | lora_node_rfm95_minipro:XCVR_RFM95W-868S2 | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | Val** | lora_node_rfm95_minipro:ttn_cat_logo_small_silks | Ref** |
| 1 | Val** | lora_node_rfm95_minipro:ttnmapper_logo_small_silks | Ref** |
| 1 | Val** | lora_node_rfm95_minipro:ttnmapper_logo | Ref** |
| 1 | Val** | lora_node_rfm95_minipro:lorawan_logo_small | Ref** |
The 25 most common of 27 parts.

pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!

Uspizig/Bresser_Weather_NEW
Arduino/ESP32 Sketch for a CC101 Receiver 868.3MHz to Decode Weather Data of a Bresser 5in1 Weather Station(2022)

Uspizig/M5StampC3-EINK
Eink Board Addon for M5Stack Stamp C3 for Eink Waveshare Displays

qinno/qEdge-UI
qedge+ is the industry's low power design alternative to the standard PC approach. qEdge-UI is part of qEdge+ and consists of a RaspBerry Pico with LCD, touch screen and keys and an 868MHz LoRa radio module.

EPFLRocketTeam/2024_C_GS_RadioBoardSchematics
This repository holds all the kicad schematics required for the radioboards



It measures 90.1 × 45.1 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the LMS8117AMP-3.3, RFM95W-868S2 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the akirasan/LoRaWAN-tracker-TTNmapper repository on GitHub, at the commit this page was made from: the board is lora_node_rfm95_minipro/lora_node_rfm95_minipro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).