
Quad unibody placement0
ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

Quadcopter designed and programmed thoroughly from scratch
Quad direct is an open-source printed circuit board by ajwock, from the ajwock/quadcopter repository on GitHub. It is a 2-layer board of 27.7 × 50.5 mm with 38 parts on 53 nets, routed with 232 tracks and 0 vias.
It is built around the ESP32-C3-MINI-1-H4X, SD03C-7-ES and USB3090-30-A. Its parts include 10 resistors, 10 ICs, 8 capacitors, 5 diodes and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SD03C-7 | Imported:SOD2513X120N | U3, U5, U6, U7, U8, U10 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | .1u | Capacitor_SMD:C_0603_1608Metric | C3, C7 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 2 | D_Schottky | Imported:SM6F22AY | D3, D5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2 |
| 1 | 10pf | Imported:0603_cap | C5 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10uF | Imported:0603_cap | C4 |
| 1 | 2.2k | Imported:0603_resistor | R9 |
| 1 | 220k | Imported:0603_resistor | R7 |
| 1 | 22uF | Imported:0603_cap | C8 |
| 1 | 4.7k | Imported:0603_resistor | R10 |
| 1 | 470k | Imported:0603_resistor | R6 |
| 1 | 47k | Imported:0603_resistor | R8 |
| 1 | 4pin_header | Imported:4-rightangle-smt | U9 |
| 1 | 6.8k | Imported:0603_resistor | R5 |
| 1 | ESP32-C3-MINI-1-H4X | Imported:ESP32C3MINI1H4X | 1111 |
| 1 | L | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | TPS62A02APDDCR | Imported:SOT95P280X110-6N | U1 |
| 1 | USB3090-30-A | Imported:USB309030A | U4 |
| 1 | esp32c3_boardout | Imported:esp32c3_boardout | U2 |
The 37 most common of 38 parts.

ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch





ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

NewTec-GmbH/ZumoComSystemHW
The electronic of the ZumoComSystem shield for the Pololu Zumo32U4.



thebenedict/seattletransit-hardware
Schematic and PCB for a circuit board map of Seattle area public transit.

nikolaus018/garageDoor-pro
ESP32-C3 + GPS board that opens the garage door when you leave and arrive: firmware, KiCad PCB and perfboard build

zeugmaster/nucula-board
Nucula Board: an ESP32-C3 hardware prototype with USB-C, PN7160 NFC, OLED and detachable keyboard. KiCad sources and manufacturing files.


thousandflame1000/aetherpose
2026-10-18。已選方向:沿用 Arduino Nano 33 BLE 原版 ABX00030/帶針 ABX00034(LSM9DS1),製作供電與固定底板;六個穿戴位置各用一套。
It measures 27.7 × 50.5 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the ESP32-C3-MINI-1-H4X, SD03C-7-ES and USB3090-30-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ajwock/quadcopter repository on GitHub, at the commit this page was made from: the board is cad/quadcopter/quad_direct/quad_direct.kicad_pcb and its schematic cad/home_copter/home_copter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ajwock before reusing the design.