2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers55.9 × 57.8 mm
Ece411-group10
ajm27pdx/ece411-group10Portland State University ECE411 Practicum Group
- Size
- 55.9 × 57.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 33
- Pads
- 90
- Tracks, vias
- 121, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Oct 2022
- Updated
- 8 Dec 2022
Overview
Ece411-group10 is an open-source printed circuit board by ajm27pdx, from the ajm27pdx/ece411-group10 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55.9 × 57.8 mm with 17 parts on 33 nets, routed with 121 tracks and 19 vias.
It is built around the ARDUINO UNO R3. Its parts include 8 resistors, 2 ICs, 2 switches and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdECE411 Group 10 - 2022 Fall Practicum Project
Members
- Jing Ma
- Adam Martinez
- Janvier Mpfizi
- Tysen Tippetts
Product Design Specifications
Funcitonal Decomposition
L0
L1
Bill of Materials
Controllers
- Arduino Uno
Sensors
- Photoresistors
- RFID Sensor RC522
- Button
Actuators
- Servo Motor SG90
- LED Lasor 6mm 5mW Red Dot Laser
- LCD Screen 1602 w/ I2C controller
Misc
- Wires
- RFID Fob
- Resistors
- 3D Printed Enclosure
Software
- KiCAD -- Schematic and PCB Layout
- FreeCAD -- 3D Modeling
- ProjectLibre -- Project Management
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R5, R6, R7, R8 |
| 2 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 2 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1, SW2 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | D_Laser_1C2A | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | LD1 |
| 1 | LCD_1602_I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U2 |
| 1 | Motor_Servo_Hitec | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | M1 |
| 1 | RFID_RC522 | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | U1 |
| 1 | R_Photo | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | PR1 |
Questions
How big is the Ece411-group10 PCB?
It measures 55.9 × 57.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ece411-group10 use?
17 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ece411-group10 KiCad files?
From the ajm27pdx/ece411-group10 repository on GitHub, at the commit this page was made from: the board is CAD/CAD.kicad_pcb and its schematic CAD/CAD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ece411-group10 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
