2 layers112.7 × 100 mm
2 layers120 × 65 mm
Hack a bot controller
aj-floater/hack-a-bot-controllerHack-A-Bot 2026 Raspberry Pi Pico wireless controller hardware
- Size
- 120 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 41
- Pads
- 127
- Tracks, vias
- 155, 20
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Mar 2026
- Updated
- 20 Mar 2026
Overview
Hack a bot controller is an open-source printed circuit board by aj-floater, from the aj-floater/hack-a-bot-controller repository on GitHub. It is a 2-layer board of 120 × 65 mm with 25 parts on 41 nets, routed with 155 tracks and 20 vias.
It is built around the COM-09032 and 100SP1T1B1M1QEH. Its parts include 4 ICs, 3 resistors, 3 diodes, 3 switches and 1 capacitor. It belongs with the RP2040 boards of this library.
Main components
2Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | COM-09032 | Footprints:XDCR_COM-09032_1 | U2, U4 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 100SP1T1B1M1QEH | Footprints:SW_100SP1T1B1M1QEH | S1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | Battery | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief | BT1 |
| 1 | BatteryHolder_TruPower_BH-331P_3xAA | Battery:BatteryHolder_TruPower_BH-331P_3xAA | 3xAA Battery Holder |
| 1 | DM-OLED096-636 | Footprints:MODULE_DM-OLED096-636 | U3 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
Questions
How big is the Hack a bot controller PCB?
It measures 120 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hack a bot controller use?
25 parts, built around the COM-09032 and 100SP1T1B1M1QEH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hack a bot controller KiCad files?
From the aj-floater/hack-a-bot-controller repository on GitHub, at the commit this page was made from: the board is hack-a-bot-controller.kicad_pcb and its schematic hack-a-bot-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hack a bot controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask aj-floater before reusing the design.
Similar boards
- 2 layers127 × 203.2 mm
- 2 layers95.9 × 90.2 mm
- 2 layers206.4 × 94.4 mm
ControlPanel Common Anode
JimKueneman/TurnoutBoss
This repository contains all the design files, manuals, firmware, production information for the LCC TurnoutBoss Node
98 parts1 - 2 layers304.8 × 95.2 mm
LMN
FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project
106 parts106CC-BY-SA-4.0 - 2 layers27.3 × 34.3 mm
- 2 layers235.8 × 117.2 mm
- 2 layers130 × 109 mm
Right
Hex-4/glyph
[ a custom split keyboard for portably and comfortably interfacing with computing systems ]
49 parts11MIT