

XIAO COM
- Size
- 18 × 19.8 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 13
- Nets
- 25
- Pads
- 74
- Tracks, vias
- 112, 10
- Pours
- 52
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Aug 2021
- Updated
- 7 Sep 2026
Overview
XIAO COM is an open-source printed circuit board by Aightech, from the Aightech/CleverHand-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 18 × 19.8 mm with 13 parts on 25 nets, routed with 112 tracks and 10 vias.
It is built around the BQ27421YZFR-G1A, ICM-42670-L and WS2812. Its parts include 4 ICs, 3 capacitors, 3 connectors and 2 resistors. It belongs with the ESP32 boards of this library.
Main components
3BQ27421YZFR-G1A
DSBGA-9-40℃~+85℃ 1 2.45V~4.5V 93uA I2C Lithium Battery Monitoring IC Support DSBGA-9 Battery Management ROHSTexas InstrumentsBattery ManagementICM-42670-L
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2.25KB 3.5uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometersWS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
pcb/hmi/interface/DRY_ELEC_6CH_MID/README.mdDry Electrodes Module
This module is responsible for interfacing the sensors/actuators inputs/outputs with the user skin or with other modules.
Electrical Schematic
PCB Layout
| top view | side view |
|---|---|
3D Model
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C11 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R10, R17 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J1, J2 |
| 1 | 1uF | Capacitor_SMD:C_0201_0603Metric | C28 |
| 1 | BQ27421YZFR-G1A | 00_lcsc:DSBGA-9_L1.5-W1.5-R3-C3-P0.50-BL | U6 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_1.27mm:PinHeader_1x10_P1.27mm_Vertical | J4 |
| 1 | ICM-42670-L | 00_lcsc:LGA-14_L3.0-W2.5-P0.50-TL_QMI8658A | U2 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | WS2812 | 00_lcsc:LED-SMD_4P-L2.0-W2.0-TL_WS2812B-2020 | U10 |
| 1 | XIAO-ESP32-S3-DIP | 00_custom-footprints:XIAO-ESP32S3-DIP | U1 |
More from Aightech/CleverHand-hardware
12- 4 layers80 × 100 mm

- 4 layers60 × 60 mm

- 4 layers36 × 94 mm

- 4 layers50 × 50 mm

- 2 layers91 × 100 mm

- 4 layers11 × 25 mm

- 4 layers30 × 13 mm

- 4 layers15 × 13.9 mm

- 4 layers30 × 11 mm

- 4 layers15 × 11 mm

- 4 layers15 × 11 mm

- 4 layers22 × 18.5 mm

Similar boards
- 2 layers20 × 49.5 mm

- 2 layers89 × 92.5 mm

Kabot
kabot-io/kabot-hardware
Hardware source and production files to recreate Kabot robot in physical world
149 parts - 4 layers35 × 45 mm

- 2 layers70.3 × 67.5 mm

- 4 layers37 × 22 mm

- 2 layers308.8 × 130.3 mm

CyberKeeb2040
zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.
182 parts98CC-BY-SA-4.0 - 2 layers99.1 × 99.1 mm

TangNanoDCJ11MEM
ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor
45 parts86MIT - 2 layers49.5 × 30 mm

Questions
How big is the XIAO COM PCB?
It measures 18 × 19.8 mm and has 2 copper layers, 0.8 mm thick.
What parts does the XIAO COM use?
13 parts, built around the BQ27421YZFR-G1A, ICM-42670-L and WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XIAO COM KiCad files?
From the Aightech/CleverHand-hardware repository on GitHub, at the commit this page was made from: the board is pcb/hmi/communication/XIAO_COM/XIAO_COM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the XIAO COM design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).