

- Size
- 22 × 52.5 mm
- Copper layers
- 4
- Thickness
- 0.66 mm
- Parts
- 12
- Nets
- 37
- Pads
- 79
- Tracks, vias
- 115, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Aug 2021
- Updated
- 7 Sep 2026
Overview
S PICO is an open-source printed circuit board by Aightech, from the Aightech/CleverHand-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 22 × 52.5 mm with 12 parts on 37 nets, routed with 115 tracks and 9 vias.
It is built around the FPC-05F-18PH20. Its parts include 5 connectors and 2 resistors. It belongs with the RP2040 boards of this library.
Main components
1README
pcb/hmi/interface/DRY_ELEC_6CH_MID/README.mdDry Electrodes Module
This module is responsible for interfacing the sensors/actuators inputs/outputs with the user skin or with other modules.
Electrical Schematic
PCB Layout
| top view | side view |
|---|---|
3D Model
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | Conn_01x20_Male | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J4, J5 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J1 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_Vertical | J3 |
| 1 | FPC-05F-18PH20 | 00_lcsc:FPC-SMD_18P-P0.50_X05C2018TZ | FPC1 |
| 1 | LOGO | LOGO | G*** |
| 1 | jack2.5_PJ-210B | 00_custom-footprints:Jack_Socket_PJ-210B | J2 |
More from Aightech/CleverHand-hardware
12- 4 layers80 × 100 mm

- 4 layers60 × 60 mm

- 4 layers36 × 94 mm

- 4 layers50 × 50 mm

- 2 layers91 × 100 mm

- 4 layers11 × 25 mm

- 4 layers30 × 13 mm

- 4 layers15 × 13.9 mm

- 4 layers30 × 11 mm

- 4 layers15 × 11 mm

- 4 layers15 × 11 mm

- 4 layers22 × 18.5 mm

Similar boards
- 4 layers

CABadge V2 1
nbtca/CABadge
CABadge 计协电子吧唧:基于 ESP32-S3 的开源圆屏互动徽章,支持动态壁纸、触摸交互、Wi-Fi/BLE 和趣味小应用,提供 PCB、3D 打印外壳、固件及配套工具。
110 parts15MIT - 4 layers99.8 × 73.8 mm

- 4 layers152.4 × 63.5 mm

- 2 layers219.7 × 111.3 mm

ScriptPad PCB
jfm92/scriptPad
The scriptPad project is a macroPad fully customizable with build in USB WebPage allowing to configure every aspect of the device without extra software or web page, everything you need in a single device.
111 partsMIT - 4 layers153 × 48 mm

- 4 layers60 × 50 mm

Embassy turtle
so-groenen/embassy_pico_turtle
Embedded IoT Turtle Tank controller based on the rp2350 microcontroller
45 partsGPL-3.0 - 4 layers52.1 × 22.6 mm

Display eval
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
12 parts4.3kMIT - 4 layers140.8 × 53.7 mm

Questions
How big is the S PICO PCB?
It measures 22 × 52.5 mm and has 4 copper layers, 0.66 mm thick.
What parts does the S PICO use?
12 parts, built around the FPC-05F-18PH20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the S PICO KiCad files?
From the Aightech/CleverHand-hardware repository on GitHub, at the commit this page was made from: the board is pcb/controller/shield/S_PICO/S_PICO.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the S PICO design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).