

- Size
- 11 × 25 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 63
- Nets
- 71
- Pads
- 277
- Tracks, vias
- 0, 0
- Pours
- 3
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Aug 2021
- Updated
- 7 Sep 2026
Overview
Emgvib is an open-source printed circuit board by Aightech, from the Aightech/CleverHand-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 11 × 25 mm with 63 parts on 71 nets.
It is built around the YZP0120-16020-01, ADS1292RIRSMR and PCA9306YZTR, with the PZ127-2-10-S, SN74LVC1G04DSFR(UMW) and YZP0664-20036-01 among its other parts. Its parts include 22 capacitors, 18 resistors, 12 ICs, 9 diodes and 1 connector.
Main components
8YZP0120-16020-01
--40℃~+85℃ 0.7mm 10000 times 12V 1A 1P 2mm 50mΩ Brass Gold Pogo Pin - Pogo Pin Spring Probe Connector ROHSXinyangzePogo Pin Spring Probe ConnectorADS1292RIRSMR
QFN-32-EP(4x4)-40℃~+85℃ 0.485MHz~0.5625MHz、0.512MHz、1.94MHz~2.25MHz 107dB 2.42V 2.7V~5.25V 24 2ppm/℃ 45ppm/℃ 8000Hz 8000Hz SPI QFN-32-EP(4x4) Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)PCA9306YZTR
DSBGA-8-40℃~+85℃ 1 1.2V~3.3V 1.8V~5.5V 2 Auto Direction Detection Bidirectional Push-Pull、Open-drain DSBGA-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersPZ127-2-10-S
SMD,P=1.27mm-40℃~+105℃ 1.27mm 1.27mm 1.5mm 1A 2 20P 2x10P 4mm Black Brass Square pin Surface Mount,Vertical SMD,P=1.27mm Pin Headers ROHSHCTLPin HeadersSN74LVC1G04DSFR(UMW)
DFN-6(1x1)DFN-6(1x1) Inverters ROHSUMWInvertersYZP0664-20036-01
--40℃~+85℃ 10000 times 12V 1A 1P 2.2mm 3.6mm 50mΩ Brass Gold Pogo Pin - Pogo Pin Spring Probe Connector ROHSXinyangzePogo Pin Spring Probe ConnectorPGB1010402KR
0402-65℃~+125℃ 0.04pF 1 12V 1nA 250V Bidirectional ESD IEC 61000-4-2 0402 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)BAT54SWFILM
SOT-323-3-40℃~+150℃ 1 Pair Series Connection 1.25A 1uA@30V 300mA 40V 900mV@100mA SOT-323-3 Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
README
pcb/hmi/interface/DRY_ELEC_6CH_MID/README.mdDry Electrodes Module
This module is responsible for interfacing the sensors/actuators inputs/outputs with the user skin or with other modules.
Electrical Schematic
PCB Layout
| top view | side view |
|---|---|
3D Model
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10K | Resistor_SMD:R_0201_0603Metric | R48, R49, R52, R53, R63, R64, R97, R98, R101, R102, R103, R104, R105, R106 |
| 12 | 4.7nF | Capacitor_SMD:C_0201_0603Metric | C57, C58, C60, C61, C62, C119, C120, C123, C124, C126, C130, C131 |
| 6 | 1uF | Capacitor_SMD:C_0201_0603Metric | C66, C69, C71, C72, C133, C135 |
| 5 | PGB1010402KR | 00_lcsc:D0402 | D18, D19, D20, D41, D42 |
| 4 | BAT54SWFILM | 00_lcsc:SOT-323-3_L2.0-W1.3-P1.30-LS2.1-BR | D21, D22, D45, D46 |
| 4 | YZP0120-16020-01 | 00_lcsc:SMD_YZP0120-16020-01 | U5, U6, U8, U9 |
| 2 | 100k | Resistor_SMD:R_0201_0603Metric | R50, R54 |
| 2 | 100nF | Capacitor_SMD:C_0201_0603Metric | C128, C129 |
| 1 | 0R | Resistor_SMD:R_0201_0603Metric | R55 |
| 1 | 1.5nF | Capacitor_SMD:C_0201_0603Metric | C59 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C127 |
| 1 | 1M | Resistor_SMD:R_0201_0603Metric | R51 |
| 1 | ADS1292RIRSMR | 00_lcsc:QFN-32_L4.0-W4.0-P0.40-TL-EP2.8 | U12 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J7 |
| 1 | DRV2625YFFR | 00_lcsc:DSBGA-9_L1.4-W1.3-R3-C3-P0.40-BL | U27 |
| 1 | PCA9306YZTR | 00_lcsc:DSBGA-8_L1.9-W0.9-R2-C4-P0.50-BL | U2 |
| 1 | PZ127-2-10-S | 00_lcsc:HDR-SMD_PZ127-2-10-S | U1 |
| 1 | SN74LVC1G04DSFR | 00_lcsc:UDFN-6_L1.0-W1.0-P0.35-BL | U3 |
| 1 | TPS7A0230PDQNR | 00_lcsc:UDFN-4_L1.0-W1.0-P0.65-TL | U23 |
| 1 | TestPoint | 00_custom-footprints:TestPoint_Pad_D1.0mm | TP_VDD_6 |
| 1 | WS2812-2020 | 00_lcsc:LED-SMD_4P-L2.0-W2.0-TL_WS2812B-2020 | U7 |
| 1 | YZP0664-20036-01 | 00_lcsc:CONN-TH_YZP0664-20036-01 | U10 |
More from Aightech/CleverHand-hardware
12- 4 layers80 × 100 mm

- 4 layers60 × 60 mm

- 4 layers36 × 94 mm

- 4 layers50 × 50 mm

- 2 layers91 × 100 mm

- 4 layers30 × 13 mm

- 4 layers15 × 13.9 mm

- 4 layers30 × 11 mm

- 4 layers15 × 11 mm

- 4 layers15 × 11 mm

- 4 layers22 × 18.5 mm

- 4 layers15 × 11 mm

Similar boards
- 6 layers22 × 30 mm

Rtl2832u r820t
taskx6004/rtl-sdr_m2e-minimum
Minimum hardware design for RTL-SDR in m.2 key-e form
75 parts28 - 2 layers19.5 × 44.3 mm

Rmpp pogo breakout
wormyrocks/rmpp-pogo-breakout
attempt at single-pcb magnetic pogo breakout for rMPP expansion connector
22 parts - 4 layers50.8 × 22.9 mm

- 4 layers27 × 31.5 mm

Amp macom vga
loxodes/vna
Under development open hardware microwave vector network analyzer
63 parts205 - 4 layers71 × 10 mm

001 dot flipper
pierre-muth/fast-flipdot
Driving a flipdot matrix differently. All dots simultaneously.
63 parts145GPL-3.0 - 4 layers68.1 × 66 mm

Ambient
lab11/signpost
Exploring what happens when you put computers on sign posts.
63 parts97Apache-2.0 - 4 layers40 × 40 mm

- 4 layers60.2 × 20.8 mm

PhaseLatchMini
AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.
63 parts72
Questions
How big is the Emgvib PCB?
It measures 11 × 25 mm and has 4 copper layers, 0.8 mm thick.
What parts does the Emgvib use?
63 parts, built around the YZP0120-16020-01, ADS1292RIRSMR, PCA9306YZTR and PZ127-2-10-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Emgvib KiCad files?
From the Aightech/CleverHand-hardware repository on GitHub, at the commit this page was made from: the board is pcb/hmi/submodule/v2/emgvib/emgvib.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Emgvib design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).