Skip to the content
2 layers121 × 65.9 mmPCB Principal V7, the printed circuit board in 3D

PCB Principal V7

Aid-Code/CDR-20242
Size
121 × 65.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
71
Pads
145
Tracks, vias
302, 18
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Jun 2023
Updated
26 Feb 2025

Overview

PCB Principal V7 is an open-source printed circuit board by Aid-Code, from the Aid-Code/CDR-2024 repository on GitHub. It is a 2-layer board of 121 × 65.9 mm with 19 parts on 71 nets, routed with 302 tracks and 18 vias.

It is built around the CD74HC4067M. Its parts include 5 diodes, 4 connectors, 3 resistors, 3 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

19
QtyValueFootprintReferences
21N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2
1120Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
11KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2
1910Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1CD74HC4067MPackage_SO:SOIC-24W_7.5x15.4mm_P1.27mmU2
1Conexion SensoresConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_HorizontalJ1
1LEDLED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD3
1LED RjoLED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD4
1LM2596_OKStepDown:StepDownLM1
1MONSTER SHIELDModule:Arduino_UNO_R3A2
1On/Off GeneralTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ3
1On/Off MotoresButton_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1QSW1
1Power Input 1Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ6
1Power MonsterTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ2
1SW_DIP_x05Button_Switch_THT:SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mmSW2
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW3
1VerdeLED_THT:LED_D5.0mm_ClearD5

More from Aid-Code/CDR-2024

11

Similar boards

  • 2 layers312 × 140 mmTsynth2 Rev1.3, the printed circuit board in 3D

    Tsynth2 Rev1.3

    Electrotechnique/TSynth-Teensy4.1

    TSynth for Teensy 4.1

    108 parts182
  • 2 layers422.4 × 118.2 mmMidiMood (tht), the printed circuit board in 3D

    MidiMood (tht)

    silveirago/MidiMood

    This repository contains the code for a custom MIDI controller project called MidiMood, built using an ATmega32U4 microcontroller (or similar).

    53 parts82
  • 2 layers248.9 × 120.7 mm16nx, the printed circuit board in 3D

    16nx

    16n-faderbank/16nx

    16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

    171 parts76
  • 4 layers100 × 100 mmOPDM, the printed circuit board in 3D

    OPDM

    brenonsantos/OpenPDM

    OpenPDM is an open-source programable Power Distribution Module for your car

    156 parts75MIT
  • 2 layers215.9 × 101.6 mmIps20, the printed circuit board in 3D

    Ips20

    gzweigle/open-hybrid-piano

    Building a hybrid MIDI digital piano

    135 parts61GPL-3.0
  • 2 layers152.4 × 95.3 mmControl board, the printed circuit board in 3D

    Control board

    carsonrobles/fpga-guitar-pedal

    FPGA based guitar effect station.

    51 parts36
  • 2 layers100 × 100 mmEavesdrum module, the printed circuit board in 3D

    Eavesdrum module

    tobigun/EavesDrum

    EavesDrum is an e-drum trigger module project, designed for musicians and makers. It allows you to connect drum pads or piezo triggers and converts their signals into MIDI events.

    103 parts25GPL-3.0
  • 4 layers33 × 65.5 mmOM FlexGrid Rigid PCB, the printed circuit board in 3D

    OM FlexGrid Rigid PCB

    Open-Muscle/OpenMuscle-FlexGrid

    60-sensor wearable with flexible PCB and pressure matrix

    65 parts19CERN-OHL-S-2.0

Questions

How big is the PCB Principal V7 PCB?

It measures 121 × 65.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PCB Principal V7 use?

19 parts, built around the CD74HC4067M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCB Principal V7 KiCad files?

From the Aid-Code/CDR-2024 repository on GitHub, at the commit this page was made from: the board is Electronica/PCB/PCB Principal V7 - V2/PCB Principal V7.kicad_pcb and its schematic Electronica/CNY PLACA DYNER/CNY PLACA DYNER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCB Principal V7 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Aid-Code before reusing the design.