

PCB Principal V4
- Size
- 126.1 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 65
- Pads
- 124
- Tracks, vias
- 199, 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Jun 2023
- Updated
- 26 Feb 2025
Overview
PCB Principal V4 is an open-source printed circuit board by Aid-Code, from the Aid-Code/CDR-2024 repository on GitHub. It is a 2-layer board of 126.1 × 70 mm with 21 parts on 65 nets, routed with 199 tracks and 10 vias.
Its parts include 5 connectors, 4 diodes and 2 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | , , , | ||
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D3, D4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | Arduino Nano |
| 1 | Conexion Sensores | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Horizontal | Pines Sensores |
| 1 | IDC Placa Botones | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J5 |
| 1 | LM2596_OK | LM2596:LM2596_correctedMeas | LM1 |
| 1 | MONSTER SHIELD | Module:Arduino_UNO_R3 | Monster Shield |
| 1 | On/Off General | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | SW On/Off |
| 1 | On/Off Motores | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW Motores |
| 1 | Power Input 1 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J6 |
| 1 | Power Input 2 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J4 |
| 1 | Power Monster | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | TP | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J12 |
More from Aid-Code/CDR-2024
11- 2 layers127.5 × 78.4 mm

- 2 layers121 × 65.9 mm

- 2 layers79.3 × 139.1 mm

- 2 layers121 × 65.4 mm

- 2 layers72.5 × 30.1 mm

- 2 layers56.1 × 32.5 mm

- 2 layers65.2 × 34.7 mm

- 2 layers69.2 × 43.3 mm

- 2 layers70.7 × 34.9 mm

- 2 layers23 × 17.2 mm

- 2 layers18.6 × 9 mm

Similar boards
- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

- 2 layers161.3 × 111.8 mm

Questions
How big is the PCB Principal V4 PCB?
It measures 126.1 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Principal V4 use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Principal V4 KiCad files?
From the Aid-Code/CDR-2024 repository on GitHub, at the commit this page was made from: the board is Electronica/PCB/PCB Principal V4/PCB Principal V4.kicad_pcb and its schematic Electronica/CNY PLACA DYNER/CNY PLACA DYNER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Principal V4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Aid-Code before reusing the design.