
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

PWM-based servo driver board design.
Servo control is an open-source printed circuit board by ahmadhasanin2003-coder, from the ahmadhasanin2003-coder/Servo-Control-PCB repository on GitHub. It is a 2-layer board of 58.5 × 28 mm with 12 parts on 8 nets, routed with 42 tracks and 0 vias.
It is built around the NE555P. Its parts include 4 resistors, 2 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the robots and motor control boards of this library.
A simple servo control circuit designed using the NE555 timer IC.
This project generates a variable control signal for a servo using a 555 timer configured as an astable/pulse-generation circuit.
The servo position can be adjusted using a potentiometer, which changes the timing characteristics of the generated signal.
The NE555 generates a periodic pulse signal. The potentiometer changes the charging/discharging timing of the capacitor, which changes the pulse characteristics supplied to the servo.
By adjusting the potentiometer, the servo position can be controlled.
The hardware directory contains the KiCad design files:
.kicad_pro — KiCad project.kicad_sch — Schematic.kicad_pcb — PCB layoutSchematic: Completed
PCB: In progress
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 22nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 3M3 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 56k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | R4 |
The 10 most common of 12 parts.

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 58.5 × 28 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ahmadhasanin2003-coder/Servo-Control-PCB repository on GitHub, at the commit this page was made from: the board is servo_control.kicad_pcb and its schematic servo_control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ahmadhasanin2003-coder before reusing the design.