2 layers44.5 × 78.7 mm
Walkie talkie
andykarpov/walkie-talkie
A custom pcb for the original project https://vrtp.ru/index.php?act=categories&CODE=article&article=3351
141 parts2
2 layers100 × 100 mm
DimmerDigital Pic16f628a
Agustin586/Pic-Projects1Aca se encuentran todos los programas de pic
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 66
- Pads
- 201
- Tracks, vias
- 570, 1
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 May 2021
- Updated
- 20 Jun 2022
Overview
DimmerDigital Pic16f628a is an open-source printed circuit board by Agustin586, from the Agustin586/Pic-Projects repository on GitHub. It is a 2-layer board of 100 × 100 mm with 57 parts on 66 nets, routed with 570 tracks and 1 via.
It is built around the PIC16F628A-I/P, L7805 and MOC3021M, with the BC548 and LTS-6980HR among its other parts. Its parts include 22 resistors, 7 connectors, 5 ICs, 5 diodes and 4 transistors. It belongs with the PIC boards of this library.
Main components
5
PIC16F628A-I/P
PDIP-18-40℃~+85℃ 128Byte 16 20MHz 3.5KB 3V~5.5V 8 Bit Built-in FLASH PIC PDIP-18 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MOC3021M
DIP-6-40℃~+85℃ 0.1mA 1 1.15V 100mA 330mW 4.17kV 400V 6 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
BC548
TO-92TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
LTS-6980HR
DIP-100.56 1 19.05mmx12.6mmx8mm 7 Segment 75mW Common Cathode Red DIP-10 LED Segment Displays ROHSLite-OnLED Segment Displays
README
README.mdPic-Projects
Aca se encuentran todos los programas de pic
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8, R9, R11, R12, R13, R14, R18, R22 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6, R10, R15, R16, R17 |
| 4 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R19, R20, R21 |
| 3 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q3, Q4 |
| 3 | LTS-6980HR | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2, AFF3 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2, D4 |
| 1 | 0.01uf 400V | Capacitor_THT:C_Rect_L31.5mm_W9.0mm_P27.50mm_MKS4 | C1 |
| 1 | 100nf | Capacitor_THT:C_Rect_L10.0mm_W3.0mm_P7.50mm_FKS3_FKP3 | C3 |
| 1 | 180 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 330nf | Capacitor_THT:C_Rect_L10.0mm_W3.0mm_P7.50mm_FKS3_FKP3 | C2 |
| 1 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 39 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 4511 | Package_DIP:DIP-16_W10.16mm_LongPads | U5 |
| 1 | Alimentacion | Borneras con tornillos:bornera_tornillos_1x03 | J7 |
| 1 | BT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | BT136-500 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | DOWN | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | D_Bridge_+A-A | Diode_THT:Diode_Bridge_Round_D9.0mm | D1 |
| 1 | Entrada_220v | Borneras con tornillos:bornera_tornillos_1x03 | J1 |
| 1 | Estado Encendido | LED_THT:LED_D5.0mm | D5 |
| 1 | Estado Salida | LED_THT:LED_D5.0mm | D3 |
| 1 | Habilitacion 5v | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | MOC3021M | Package_DIP:DIP-6_W7.62mm_LongPads | U1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm_LongPads | U2 |
| 1 | PIC16F628A | Package_DIP:DIP-18_W7.62mm_LongPads | U4 |
| 1 | PICKIT 3 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | PROGRAMACION | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | Salida_Triac | Borneras con tornillos:bornera_tornillos_1x03 | J2 |
| 1 | Start/Stop | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | UP | Button_Switch_THT:SW_PUSH_6mm | SW2 |
Questions
How big is the DimmerDigital Pic16f628a PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DimmerDigital Pic16f628a use?
57 parts, built around the PIC16F628A-I/P, L7805, MOC3021M and BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DimmerDigital Pic16f628a KiCad files?
From the Agustin586/Pic-Projects repository on GitHub, at the commit this page was made from: the board is DimmerDigital_Pic16f628a/Pcb/DimmerDigital_Pic16f628a/DimmerDigital_Pic16f628a.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DimmerDigital Pic16f628a design in my own project?
Its repository states no licence, so its author keeps all rights: ask Agustin586 before reusing the design.
Similar boards
- 2 layers100 × 50 mm
- 2 layers66 × 133.4 mm
- 2 layers
- 2 layers
- 2 layers91.8 × 42.7 mm
Racktemperatur
klein0r/pcb-rack-temperature-control
Control fans in your rack depending on current temperature
28 partsMIT - 2 layers161 × 177 mm
- 2 layers
