2 layers16.5 × 20 mm
SHT35 Breakout
aycaozkann/sensirion-sht35-breakout
SHT35 I2C temperature/humidity sensor breakout board — KiCad schematic + PCB, DRC/ERC clean, fab-ready gerbers/BOM/PnP
10 parts
2 layers15 × 11.2 mm
Sgp40breakout
agners/sgp40breakout2Sensirion SGP40 Breakout Board
- Size
- 15 × 11.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 7
- Pads
- 37
- Tracks, vias
- 85, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Sep 2020
- Updated
- 3 Oct 2020
Overview
Sgp40breakout is an open-source printed circuit board by agners, from the agners/sgp40breakout repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 15 × 11.2 mm with 14 parts on 7 nets, routed with 85 tracks and 6 vias.
It is built around the SHT35-DIS-F. Its parts include 3 capacitors, 3 resistors, 2 ICs and 1 connector. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
1README
README.mdSGP40 & SHT35-DIS Breakout Board
Simple Breakout Board for Sensirion SGP40 (VOC Sensor) and SHT35-DIS (Temperature and Humidity Sensor). A PDF version of the schematic: sgp40breakout.pdf.
Designed with KiCad.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1µF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 4.7kΩ | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 4.7Ω | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1 |
| 1 | SGP40 | sgp40breakout:Sensirion_DFN-6-1EP_2.44x2.44mm_P0.8mm | U1 |
| 1 | SHT35-DIS | sgp40breakout:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U2 |
The 12 most common of 14 parts.
Questions
How big is the Sgp40breakout PCB?
It measures 15 × 11.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sgp40breakout use?
14 parts, built around the SHT35-DIS-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sgp40breakout KiCad files?
From the agners/sgp40breakout repository on GitHub, at the commit this page was made from: the board is sgp40breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sgp40breakout design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers54.6 × 86.4 mm
- 4 layers47.8 × 23.1 mm
- 2 layers120 × 120 mm
USB FTDI FT4232H Chip
mmantawy-sees-ai/FTDI-FT4232H-PCB
New PCB that has the FTDI FT4232H Chip
74 parts - 2 layers
Navboard
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
47 parts192MIT - 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915