
Core64 HB
ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

64 bits of core memory and LEDs to interact with directly using a magnetic wand.
Core64 CB is an open-source printed circuit board by ageppert, from the ageppert/Core-64-Interactive-Core-Memory-Badge repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 85 × 85 mm with 51 parts on 62 nets, routed with 822 tracks and 120 vias.
It is built around the BH1730FVC-TR, LTR-303ALS-01 and LTR-329ALS-01, with the RPR-0521RS, SI7210-B-00-IV and SI7210-B-03-IV among its other parts. Its parts include 14 ICs, 9 capacitors, 5 resistors, 2 connectors and 2 inductors.
Weave your own 64 bits of core memory over the top of LEDs to interact with directly using a magnetic wand.
Purchase: https://www.Core64.io
Follow this project at: https://hackaday.io/project/166155-core-64-interactive-core-memory-badge
You are in the development repository. Beta Kits and production version firmware is at https://github.com/ageppert/Core64/
v0.5 Triple Board (added custom LED Matrix) - Beta Test Kits. Beta Kit Repo at https://github.com/ageppert/Core64/
v0.4 Core Board - Neon Pixel Edition. Expanded Core Grid Array to work with Neon Pixels!
v0.4 Dual Boards (Blue LB + Yellow CB), moved up to Teensy 3.2, removed IO Expanders, added more expansion/hacking headers.
v0.3.1 Hand re-worked v0.3 with 5V0 and 3V3 regulators each seperately sourced after power switch to provide improved power supplies.
v0.3 Dual Boards (both Red) with Teensy LC. One core board, one logic board. Used IO Expanders to drive the Core matrix, which ended up being way too slow.
v0.2 Bug fixes learned from v0.1 applied. This version has not been made or tested, but should work.
v0.1.1 Single Green Board worked after I added missing OR gate circuitry!
v0.1 Single Green Board with Teensy LC. The first hand assembled prototype. Made one and it worked after I added missing circuitry!
Share-A-Hack version
Proof-Of-Concept version
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17 +1 |
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C7, C8, C9 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 4 | TCS40DPR,LF | Package_TO_SOT_SMD:SOT-23 | U9, U10, U11, U12 |
| 2 | 929834-04-36-RK | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical_SMD_and_TH_Pin1Right | J1, J2 |
| 2 | TS3A4751PWR | TI_TS3A4751PWR:TS3A4751PWR | U13, U14 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | BH1730FVC | ALS_BH1730:REG_BD00IC0WHFV-GTR | U6 |
| 1 | Core_64_Logo | Core_64_KiCad_Library:Core64.io_w_core_symbol_9mm_tall | L1 |
| 1 | Core_64_M-+S_Buttons_4mm | Core_Memory_8x8_Array:Core64-M_-_+_S_Buttons | L2 |
| 1 | Core_Memory_8x8_Array_Front_Facing | Core_64_footprints:core_64_6.75mm_square_v0.5_front_facing | CM1 |
| 1 | LTR-303ALS-01 | OptoDevice:Lite-On_LTR-303ALS-01 | U7 |
| 1 | LTR-329ALS-01 | LiteOn_LTR-329ALS:LTR-329ALS-01 | U8 |
| 1 | RPR-0521RS | Rohm_RPR-0521RS:RPR0521RS | U5 |
| 1 | SFH11-NBPC-D03-ST-BK | Badgelife_SAO_v169bis_20190321-0053:Badgelife-SAOv169-BADGE-2x3 | X1 |
| 1 | SI7210-B-00-IV | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SI7210-B-02-IV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SI7210-B-03-IV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | SI7210-B-04-IV | Package_TO_SOT_SMD:SOT-23-5 | U4 |

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.
%20v0.3/Interactive%20Core%20Memory%20Badge%20(Logic)%20v0.3.kicad_pcb.jpg?size=s&soon)
ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.

ageppert/Core16-Interactive-Core-Memory
Weave 16 bits of core memory and LEDs to interact with using a magnetic wand



HakkiiSama/day1-git-kicad
This project was created to practice PCB design with KiCad and version control with Git and GitHub.

Jsnchg/Heavy-Operations-UI-Industry-System-EI-SMPS-5-65-200-

patrickimani-21/Waste-management-and-sorting-autonomous-system-Sep22
Jacob mutiso -mechanical and trello management : Familiar with mechanical design and project management.


It measures 85 × 85 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the BH1730FVC-TR, LTR-303ALS-01, LTR-329ALS-01 and RPR-0521RS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ageppert/Core-64-Interactive-Core-Memory-Badge repository on GitHub, at the commit this page was made from: the board is Electronic Design/Core64 CB v1.1/Core64 CB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).