

- Size
- 80.5 × 80.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 79
- Pads
- 207
- Tracks, vias
- 658, 437
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Jun 2024
- Updated
- 1 Sep 2026
Overview
OBCv1 is an open-source printed circuit board by AfriOrbit, from the AfriOrbit/EduSat-Project repository on GitHub. It is a 4-layer board of 80.5 × 80.5 mm with 32 parts on 79 nets, routed with 658 tracks and 437 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, TF-01A and AMS1117-3.3, with the SP0503BAHTG among its other parts. Its parts include 11 capacitors, 3 resistors, 3 diodes, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
4ESP32-S3-WROOM-1-N16R8
SMD,25.5x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTF-01A
SMD1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card ConnectorAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0u1F | Capacitor_SMD:C_0805_2012Metric | C3, C5, C6, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D4, D5 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | BOOT, RESET |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 22uF/16V | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Ai-Thinker-Ra-02 | RF_Module:Ai-Thinker-Ra-01-LoRa | U3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1-N16R8:ESP32S3WROOM1N8R2 | X1 |
| 1 | IDC Connector 2x10 20P | Connector_IDC:IDC-Header_2x10_P2.54mm_Horizontal | J3 |
| 1 | LOGO | LOGO | G*** |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D2 |
| 1 | TF-01A | TF-01A:TF-01A | MICRO_SD1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | USB |
| 1 | WE-XTAL_85SMX | WE-XTAL_85SMX:WE-XTAL_85SMX | Y1 |
More from AfriOrbit/EduSat-Project
11- 2 layers80.6 × 80.5 mm

- 2 layers80.5 × 80.5 mm

- 2 layers80.5 × 80.5 mm

- 2 layers86.8 × 57.5 mm

- 4 layers80.5 × 80.5 mm

- 2 layers100 × 100 mm

- 2 layers85.3 × 87.8 mm

- 2 layers85.4 × 87.9 mm

- 2 layers80.6 × 80.5 mm

- 4 layers80.5 × 80.5 mm

- 2 layers85.4 × 87.9 mm

Similar boards
- 4 layers75.5 × 82.7 mm

IoT Edge Device V1
AfriOrbit/SDR-IOT-project
This project includes all work materials for the SDR and IOT communication systems.
99 parts - 4 layers160 × 75 mm

Esp32-emu turbo
ashkan89/esp32-emu-turbo
Handheld retro gaming console based on ESP32-S3 for NES and SNES emulation
111 parts - 4 layers57.8 × 51.5 mm

Singy
devisunofficial/Singy
This is an mp3 player I build because I wanted a mp3 player because having an MP3 player seems cool but not wanted to buy one. It is inspired from iPod but it is not that good(I never had iPod).
78 parts - 2 layers95.3 × 72.4 mm

Rck22
Muriukidavid/reflow_toaster_oven
Design for a home toaster oven reflow based on tinyk22 module
81 parts1 - 2 layers99.8 × 60.2 mm

Irrigation IoT
VictorRavani/Irrigation_IoT
This project covers the complete development of Hardware and Firmware for IoT-based supervisory control. It offers all the necessary information and resources so that anyone can set up the system independently.
79 parts4MIT - 2 layers149.9 × 134.2 mm

- 4 layers95 × 78 mm

Smart db
c-lydia/SmartDB
A distribution board system designed for automatic electrical fault monitoring using Digital Signal Processing (FFT analysis), Isolation Forest, and YOLO thermal imaging detection with a Mobile App, alerting system, and…
82 partsApache-2.0 - 2 layers95 × 62.1 mm

Autonomous Gardening Rover v2
rct4/Autonomous-Soil-Monitoring-Rover
The autonomous soil monitoring rover is a project that aims to assist commercial farmers and personal gardeners by introducing an automated solution to monitoring soil data.
40 parts
Questions
How big is the OBCv1 PCB?
It measures 80.5 × 80.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the OBCv1 use?
32 parts, built around the ESP32-S3-WROOM-1-N16R8, TF-01A, AMS1117-3.3 and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OBCv1 KiCad files?
From the AfriOrbit/EduSat-Project repository on GitHub, at the commit this page was made from: the board is EduSat v2/OBCv1/OBCv1.kicad_pcb and its schematic EduSat v1/SensorBoardv2/SensorSchem.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OBCv1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AfriOrbit before reusing the design.