Skip to the content
2 layers200 × 120 mmIO Expander, the printed circuit board in 3D

PCB files for MqGateway

Size
200 × 120 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
102
Pads
314
Tracks, vias
979, 234
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Jan 2021
Updated
18 Apr 2022

Overview

IO Expander is an open-source printed circuit board by aetas, from the aetas/MqGateway-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 200 × 120 mm with 33 parts on 102 nets, routed with 979 tracks and 234 vias.

README

README.md

MqGateway PCB projects

Schematics and PCB design for MqGateway boards.

Source files can be read with KiCad. GERBER files are available in the releases.

Read more about MqGateway on the documentation site.

Issues

If you have found any problem with the PCB projects - please create an issue in aetas/mqgateway repository.

Parts

33
QtyValueFootprintReferences
8MountingHole_3.5mm_PadMounting_Holes:MountingHole_3.5mm_Pad, , , , , , ,
4MCP23017_SPHousings_DIP:DIP-28_W7.62mm_LongPadsEXPANDER_1, EXPANDER_2, EXPANDER_3, EXPANDER_4
2R_POWER_LEDResistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR_5V_POWER_LED_1, R_12V_POWER_LED_1
1
112Vw_conn_screw:mors_2p12V_OUTPUT_1
112V PWR LEDLEDs:LED_D3.0mm12V_POWER_LED_1
15Vw_conn_screw:mors_2p5V_OUTPUT_1
15V FROM STEP-DOWNaetas_kicad:SW_SPDT-3mmSW_SLIDE_SPDT_3
15V PWR LEDLEDs:LED_D3.0mm5V_POWER_LED_1
1CHECK LEDLEDs:LED_D3.0mmEXTENDER_CHECK_LED_1
1DC 5/12Vw_conn_misc:dc_socketDC_JACK_1
1Extra IO Connector INw_conn_strip:vasch_strip_5x2EXTRA_IO_CONNECTOR_1
1Extra IO Connector OUTw_conn_strip:vasch_strip_5x2EXTRA_IO_CONNECTOR_2
1Power switchw_conn_screw:mors_2pPOWER_SWITCH_1
1RJ45 x16aetas_kicad:8p8c_2x8_roomhubRJ45x16_1
1RS485 ConnectorConnectors_Phoenix:PhoenixContact_MC-G_04x3.50mm_AngledRS485_CONNECTOR_1
1RS485_JUMPERSw_pin_strip:pin_strip_2x2RS485_OUT_Jumpers_1
1R_EXTENDER_CHECK_LEDResistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR_EXTENDER_CHECK_LED_1
1SW_5V_OR_12Vaetas_kicad:SW_SPDT-3mmSW_SLIDE_SPDT_2
1SW_EXTRA_5V_ONOFFaetas_kicad:SW_SPDT-3mmSW_SLIDE_SPDT_1
1Screw_Terminal_01x02w_conn_screw:mors_2pEXT_BUTTON_1
1StepDown_12V_5VStepDown:YAAJ_DCDC_StepDown_LM2596LM2596_Module_1

More from aetas/MqGateway-PCB

2
  • 2 layers200 × 120 mmMqGateway, the printed circuit board in 3D

    MqGateway

    aetas/MqGateway-PCB

    PCB files for MqGateway

    44 parts3MIT
  • 2 layers41 × 44 mmNode, the printed circuit board in 3D

    Node

    aetas/MqGateway-PCB

    PCB files for MqGateway

    14 parts3MIT

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the IO Expander PCB?

It measures 200 × 120 mm and has 2 copper layers, 1.6 mm thick.

What parts does the IO Expander use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IO Expander KiCad files?

From the aetas/MqGateway-PCB repository on GitHub, at the commit this page was made from: the board is IO_Expander/IO_Expander.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the IO Expander design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).