

MqGateway
PCB files for MqGateway
- Size
- 200 × 120 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 136
- Pads
- 403
- Tracks, vias
- 1,319, 320
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jan 2021
- Updated
- 18 Apr 2022
Overview
MqGateway is an open-source printed circuit board by aetas, from the aetas/MqGateway-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 200 × 120 mm with 44 parts on 136 nets, routed with 1,319 tracks and 320 vias.
It is built around the MAX485ED.
Main components
1README
README.mdMqGateway PCB projects
Schematics and PCB design for MqGateway boards.
Source files can be read with KiCad. GERBER files are available in the releases.
Read more about MqGateway on the documentation site.
Issues
If you have found any problem with the PCB projects - please create an issue in aetas/mqgateway repository.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole_3.5mm_Pad | Mounting_Holes:MountingHole_3.5mm_Pad | , , , , , , , |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , , | |
| 4 | MCP23017_SP | Housings_DIP:DIP-28_W7.62mm_LongPads | EXPANDER_1, EXPANDER_2, EXPANDER_3, EXPANDER_4 |
| 4 | MountingHole | Mounting_Holes:MountingHole_3mm | H1, H2, H3, H4 |
| 2 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | BUTTON_1, BUTTON_2 |
| 1 | 3.3V ADD | w_pin_strip:pin_strip_2x2 | 3V3_ADD_1 |
| 1 | 3.3V REGULATOR | Power_Integrations:TO-220 | 3V3_REGULATOR_1 |
| 1 | 5V ADD | w_pin_strip:pin_strip_2x2 | 5V_ADD_1 |
| 1 | DC 5V | w_conn_misc:dc_socket | DC_JACK_1 |
| 1 | Extra IO Connector | w_conn_strip:vasch_strip_5x2 | EXTRA_IO_CONNECTOR_1 |
| 1 | Jumper | w_pin_strip:pin_strip_2 | 5V_TO_DL33CV_JUMPER_1 |
| 1 | LED3_IN | w_pin_strip:pin_socket_1 | STATUS_RGB_LED1_1 |
| 1 | LED_ABRG | LEDs:LED_BL-FL7680RGB | STATUS_RGB_LED_1 |
| 1 | LEVEL SHIFTER | aetas_kicad:LEVEL-SHIFTER-4CH | LEVEL_SHIFTER_1 |
| 1 | MAX485 | DIY Library:RS485-TTL-CONVERTER | MAX485 |
| 1 | MAX485 JUMPERS | w_pin_strip:pin_strip_2x2 | RS485_MAX_Jumpers_1 |
| 1 | NanoPi NEO Socket | Socket_Strips:Socket_Strip_Straight_2x12_Pitch2.54mm | NanoPi_NEO_1 |
| 1 | POWER LED | LEDs:LED_D3.0mm | POWER_LED_1 |
| 1 | Power switch | w_conn_screw:mors_2p | POWER_SWITCH_1 |
| 1 | RJ45 x16 | aetas_kicad:8p8c_2x8_roomhub | RJ45x16_1 |
| 1 | R_LED2 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R_LED2 |
| 1 | R_LED3 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R_LED0 |
| 1 | R_LED4 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R_LED1 |
| 1 | R_POWER_LED | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R_LED_POWER_1 |
| 1 | Raspberry Socket | w_conn_strip:vasch_strip_20x2 | RaspberryPi_1 |
| 1 | Screw_Terminal_01x02 | w_conn_screw:mors_2p | BUTTON_3 |
| 1 | UART_JUMPERS | w_pin_strip:pin_strip_2x2 | RS485_Jumpers_1 |
More from aetas/MqGateway-PCB
2- 2 layers200 × 120 mm

- 2 layers41 × 44 mm

Similar boards
- 2 layers63 × 46 mm

Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino
31 parts41MIT - 2 layers150 × 50 mm

- 4 layers96 × 172 mm

- 2 layers60 × 30 mm

Scoring table hardware
GrappleRobotics/JMS
Another alternative field management system for the FIRST Robotics Competition.
30 parts18 - 2 layers68.6 × 53.3 mm

XyloShield
StefanKrupop/XyloShield
Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity
19 parts17 - 2 layers257.1 × 166.2 mm

PiccoloBlack2021 14juillet v8sansMasse
SylvainVanIniitu/Piccolo-4C-Black
Piccolo MIDI stochastic sequencer
102 parts16 - 2 layers65 × 56.5 mm

Pool pi v1.1
ChaseDurand/Pool-Pi
Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.
28 parts14 - 2 layers53 × 68.7 mm

EEC IV Reader
flxkrmr/eec-iv-reader-arduino
Arduino based diagnostics-tool for Fords EEC IV ECUs
39 parts14GPL-3.0
Questions
How big is the MqGateway PCB?
It measures 200 × 120 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MqGateway use?
44 parts, built around the MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MqGateway KiCad files?
From the aetas/MqGateway-PCB repository on GitHub, at the commit this page was made from: the board is MqGateway/MqGateway.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MqGateway design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).