aditgoyal5/Forward_Ignition_PCBThis repository is about a printed circuit board I built for Team Sammard.
Forward Ignition PCB is an open-source printed circuit board by aditgoyal5, from the aditgoyal5/Forward_Ignition_PCB repository on GitHub. It is a 2-layer board of 68.2 × 52.2 mm with 135 parts on 104 nets, routed with 654 tracks and 217 vias.
It is built around the ESP32-S3-WROOM-1-N8, FT232RL and AMS1117-3.3, with the AMS1117-5.0, MAX9075EUK and S8050 among its other parts. Its parts include 39 capacitors, 39 resistors, 17 diodes, 9 connectors and 6 transistors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R12, R14, R16, R17, R19, R20, R21, R22, R23, R35, R36 |
| 12 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R9, R15, R24, R25, R26, R27, R28, R29, R83, R85, R135 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C12, C14, C24, C25, C26, C29, C30 |
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C27, C28, C31, C32, C33, C79, C80 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D5, D7, D8, D9, D10, D13, D14, D17 |
| 6 | 22uF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C21, C22, C23 |
| 5 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C4, C5, C34, C42, C46 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C15, C20 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R81, R109, R134 |
| 3 | Jumper_SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP6, JP7 |
| 3 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H2, H3, H4 |
| 3 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4 |
| 3 | SMAJ7.5CA | Diode_SMD:D_SMA | D1, D4, D6 |
| 3 | SS34 | Diode_SMD:D_SMA | D11, D12, D19 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 0k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C40, C41 |
| 2 | 22 uF | Capacitor_SMD:C_0603_1608Metric | C13, C16 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | FerriteBead | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW3, SW4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal | J6, J8 |
| 2 | TPS563200 | Package_TO_SOT_SMD:SOT-23-6 | TPS_3.3V1, TPS_5V1 |
| 1 | 100 nF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 10ohm | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R147 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2.2uH | Inductor_SMD:L_Ferrocore_DLG-0403 | L1 |
| 1 | 3.3uH | Inductor_SMD:L_Ferrocore_DLG-0403 | L2 |
| 1 | 33.2k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric | C43 |
| 1 | 54.9k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AO3401 | Package_TO_SOT_SMD:SOT-23-3 | Q12 |
| 1 | BAT54HT1G | Diode_SMD:D_SOD-323_HandSoldering | D15 |
| 1 | BAT54J | Diode_SMD:D_SOD-323_HandSoldering | D18 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x02_Pin | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal | J1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1U | U1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U8 |
| 1 | LoRaRYLR998 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | MAX9075 | Package_TO_SOT_SMD:SOT-23-5 | U201 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | SISA12ADN-T1-GE3 | Package_SO:Vishay_PowerPAK_1212-8_Single | Q18 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Screw_Terminal_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Screw_Terminal_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | Screw_Terminal_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D16 |
| 1 | XT30PW(2*2)-M | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | PYRO_XT30 |
It measures 68.2 × 52.2 mm and has 2 copper layers, 1.6 mm thick.
135 parts, built around the ESP32-S3-WROOM-1-N8, FT232RL, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the aditgoyal5/Forward_Ignition_PCB repository on GitHub, at the commit this page was made from: the board is ForwardIgnitionPCB.kicad_pcb and its schematic ForwardIgnitionPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask aditgoyal5 before reusing the design.
Ooyn/Student-Rocket-Recovery-Ground-Station---SHROTA-PRO
Shrota Pro is a handheld, STM32-based ground station PCB for student rocket recovery. Acting as a relative GPS, it integrates L89 GNSS and a BMM150 compass to pinpoint the rocket's exact landed position.
SrdjanEM/True-RMS-voltmeter
True RMS voltmeter for AC voltage measurments up to 1000 V. Includes ESD protection and overvoltage protection.
Vedanjali24/Shrota_Dongle
Shrota Dongle is a Ground Control Station PCB for receiving real-time rocket telemetry. Built around an STM32 MCU, it interfaces with a LoRa RYLR module for long-range communication.
bjthemost-hub/l103-drv8313-as5600
Joint motor driver: CH32L103 + DRV8313 + AS5600. KiCad hardware, FOC firmware, PC tools, 2-stage planetary gearbox (J, 25:1). MIT.
kquinsland/modular-rack-mount-power-system
Hardware, firmware, and host tooling for a modular mini-rack power system.