

ТКП-1.29.A-1
-ТТКРЧПДЛ-
- Size
- 55.9 × 17.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 9
- Pads
- 18
- Tracks, vias
- 9, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Jun 2020
- Updated
- 19 Oct 2026
Overview
ТКП-1.29.A-1 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 55.9 × 17.1 mm with 6 parts on 9 nets, routed with 9 tracks and 0 vias.
README
README.md-ТТКРЧПДЛ- / Тут короче педали
Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Big Muff [REV3]
Bass
Bass SM
NYC
NYC SM
Big Muff [REV2]
Bass
NYC
Crumbwave Multiplexer [REV1]
Deep Blue Delay [REV3]
[REV3C]
[C]
[C] SM
[REV3B]
[B]
[B] SM
Distortion + [REV2]
Edamamer [REV1]
Fishtaur [REV1]
[REV1A]
[A]
[A] SM
Fuzz Factory [REV1]
Main Board [REV1D] / Potentiometer Board [REV1C]
Main Board [REV1C] / Potentiometer Board [REV1B]
Main Board [REV1B] / Potentiometer Board [REV1B]
Good Grief Overdrive [REV1]
[REV1B]
[B]
[B] SM
[REV1A]
Great Depression Phaser [REV1]
Little Angel Chorus [REV1]
Salty Phaser [REV1]
Копка Земли [REV1]
[REV1B]
[B] Down-Tuned
[B] Down-Tuned SM
[B] Standard-Tuned
[B] Standard-Tuned SM
[REV1A]
[A] Down-Tuned
[A] Standard-Tuned
Крыса [REV1]
Тремоло Саши Огородникова [REV1]
[REV1B]
[REV1A]
Требования
Работа с исходными файлами осуществляется в программе KiCad.
Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:
Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.
Авторы
Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.
Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.
Лицензии
Настоящий репозиторий использует раздельное лицензирование:
-
Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
-
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
-
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | PBS-03R | SBKCL-TH-SL:CON-PBS-03R-CIRCULAR | XS1, XS2, XS3 |
| 1 | RP1: A100K | SBKCL-TH-SL:RP-PDB181-K-20-P-CIRCULAR | RP1 |
| 1 | RP2: A500K | SBKCL-TH-SL:RP-PDB181-K-20-P-CIRCULAR | RP2 |
| 1 | RP3: A500K | SBKCL-TH-SL:RP-PDB181-K-20-P-CIRCULAR | RP3 |
More from Adept666/stompboxes
12- 2 layers86.4 × 111.8 mm

- 2 layers86.4 × 111.8 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 109.2 mm

- 2 layers58.4 × 109.2 mm

- 2 layers58.4 × 109.2 mm

- 2 layers86.4 × 95.3 mm

- 2 layers86.4 × 95.3 mm

- 2 layers58.4 × 85.1 mm

- 2 layers58.4 × 85.1 mm

Similar boards
- 2 layers18.5 × 11.1 mm

Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT - 2 layers14.6 × 33 mm

- 2 layers9 × 9 mm

Dpoint
Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements
6 parts1.1kMIT - 2 layers51.5 × 16.6 mm

MicroswitchXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
6 parts1.1kGPL-3.0 - 2 layers21.9 × 76.7 mm

Amiga External
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
6 parts1kGPL-3.0 - 2 layers88.9 × 50.8 mm

Businesscard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
6 parts915 - 2 layers20.3 × 15.2 mm

L0 RGB led
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
6 parts546MIT - 2 layers9 × 3.6 mm

Questions
How big is the ТКП-1.29.A-1 PCB?
It measures 55.9 × 17.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ТКП-1.29.A-1 use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ТКП-1.29.A-1 KiCad files?
From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.29.A/ТКП-1.29.A-1/ТКП-1.29.A-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ТКП-1.29.A-1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.