Skip to the content
2 layers81.3 × 17.1 mmТКП-1.20.B-3, the printed circuit board in 3D

ТКП-1.20.B-3

Adept666/stompboxes10

-ТТКРЧПДЛ-

Size
81.3 × 17.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
9
Pads
19
Tracks, vias
43, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
28 Jun 2020
Updated
19 Oct 2026

Overview

ТКП-1.20.B-3 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 81.3 × 17.1 mm with 5 parts on 9 nets, routed with 43 tracks and 0 vias.

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Big Muff [REV3]

Gerber

Bass

Schematic

F_Fab

B_Fab

Bass SM

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

NYC SM

Schematic

F_Fab

B_Fab

Big Muff [REV2]

Gerber

Bass

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

Crumbwave Multiplexer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Schematic

F_Fab

B_Cuts

B_Jumpers

Gerber (Main Board)

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Schematic

F_Fab

B_Fab

Gerber

Little Angel Chorus [REV1]

Schematic

F_Fab

B_Fab

Gerber

Salty Phaser [REV1]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

F_Jumpers

B_Jumpers

Gerber

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

Schematic

F_Fab

B_Fab

Gerber

[REV1A]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

B_Jumpers

Gerber

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

  • Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.

  • Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.

  • Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Parts

5
QtyValueFootprintReferences
2PBS-05RKCL-TH-SL:CON-PBS-05RXS1, XS2
1RP1: B500KKCL-TH-SL:RP-PDB181-K-20-PRP1
1RP2: A1KKCL-TH-SL:RP-PDB181-K-20-PRP2
1RP3: B100KKCL-TH-SL:RP-PDB181-K-20-PRP3

More from Adept666/stompboxes

12
  • 2 layers86.4 × 111.8 mmТКП-1.23.B-1, the printed circuit board in 3D

    ТКП-1.23.B-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    214 parts10
  • 2 layers86.4 × 111.8 mmТКП-1.23.A-1, the printed circuit board in 3D

    ТКП-1.23.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    160 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-2, the printed circuit board in 3D

    ТКП-1.38.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    122 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-1, the printed circuit board in 3D

    ТКП-1.38.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    121 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.37.A-1, the printed circuit board in 3D

    ТКП-1.37.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    118 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-3, the printed circuit board in 3D

    ТКП-1.36.A-3

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-5, the printed circuit board in 3D

    ТКП-1.36.A-5

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-2, the printed circuit board in 3D

    ТКП-1.36.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    93 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-2, the printed circuit board in 3D

    ТКП-1.21.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    82 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-1, the printed circuit board in 3D

    ТКП-1.21.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    81 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-2, the printed circuit board in 3D

    ТКП-1.17.C-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    76 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-1, the printed circuit board in 3D

    ТКП-1.17.C-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    75 parts10

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the ТКП-1.20.B-3 PCB?

It measures 81.3 × 17.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.20.B-3 use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.20.B-3 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.20.B/ТКП-1.20.B-3/ТКП-1.20.B-3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.20.B-3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.