

ТКП-1.20.B-2
-ТТКРЧПДЛ-
- Size
- 81.3 × 17.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 9
- Pads
- 19
- Tracks, vias
- 43, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Jun 2020
- Updated
- 19 Oct 2026
Overview
ТКП-1.20.B-2 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 81.3 × 17.1 mm with 5 parts on 9 nets, routed with 43 tracks and 0 vias.
README
README.md-ТТКРЧПДЛ- / Тут короче педали
Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Big Muff [REV3]
Bass
Bass SM
NYC
NYC SM
Big Muff [REV2]
Bass
NYC
Crumbwave Multiplexer [REV1]
Deep Blue Delay [REV3]
[REV3C]
[C]
[C] SM
[REV3B]
[B]
[B] SM
Distortion + [REV2]
Edamamer [REV1]
Fishtaur [REV1]
[REV1A]
[A]
[A] SM
Fuzz Factory [REV1]
Main Board [REV1D] / Potentiometer Board [REV1C]
Main Board [REV1C] / Potentiometer Board [REV1B]
Main Board [REV1B] / Potentiometer Board [REV1B]
Good Grief Overdrive [REV1]
[REV1B]
[B]
[B] SM
[REV1A]
Great Depression Phaser [REV1]
Little Angel Chorus [REV1]
Salty Phaser [REV1]
Копка Земли [REV1]
[REV1B]
[B] Down-Tuned
[B] Down-Tuned SM
[B] Standard-Tuned
[B] Standard-Tuned SM
[REV1A]
[A] Down-Tuned
[A] Standard-Tuned
Крыса [REV1]
Тремоло Саши Огородникова [REV1]
[REV1B]
[REV1A]
Требования
Работа с исходными файлами осуществляется в программе KiCad.
Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:
Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.
Авторы
Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.
Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.
Лицензии
Настоящий репозиторий использует раздельное лицензирование:
-
Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
-
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
-
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | PBS-05R | KCL-TH-SL:CON-PBS-05R | XS1, XS2 |
| 1 | RP1: B50K | KCL-TH-SL:RP-PDB181-K-20-P | RP1 |
| 1 | RP2: B50K | KCL-TH-SL:RP-PDB181-K-20-P | RP2 |
| 1 | RP3: B50K | KCL-TH-SL:RP-PDB181-K-20-P | RP3 |
More from Adept666/stompboxes
12- 2 layers86.4 × 111.8 mm

- 2 layers86.4 × 111.8 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 109.2 mm

- 2 layers58.4 × 109.2 mm

- 2 layers58.4 × 109.2 mm

- 2 layers86.4 × 95.3 mm

- 2 layers86.4 × 95.3 mm

- 2 layers58.4 × 85.1 mm

- 2 layers58.4 × 85.1 mm

Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the ТКП-1.20.B-2 PCB?
It measures 81.3 × 17.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ТКП-1.20.B-2 use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ТКП-1.20.B-2 KiCad files?
From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.20.B/ТКП-1.20.B-2/ТКП-1.20.B-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ТКП-1.20.B-2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.