2 layers86.4 × 95.3 mm ТКП-1.19.B-2, the printed circuit board in 3D

ТКП-1.19.B-2

-ТТКРЧПДЛ-

Size: 86.4 × 95.3 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 68
Nets: 41
Pads: 159
Tracks, vias: 280, 0
Pours: 1
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Jun 2020
Updated: 19 Oct 2026

Overview

ТКП-1.19.B-2 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 86.4 × 95.3 mm with 68 parts on 41 nets, routed with 280 tracks and 0 vias.

It is built around the MPSA18RL and DC-005. Its parts include 19 resistors, 14 capacitors, 4 crystals, 2 connectors and 1 diode.

Main components

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

KCL
SBKCL

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Topics

stompboxes kicad

Project files

Show this board on your page

https://pcbkit.io/boards/Adept666/stompboxes/PCBS-PCAS/%D0%A2%D0%9A%D0%9F-3.19.B/%D0%A2%D0%9A%D0%9F-1.19.B-2/%D0%A2%D0%9A%D0%9F-1.19.B-2.kicad_pcb

The board's own page, for a message or a post.

Source

Repository: Adept666/stompboxes
Board file: PCBS-PCAS/ТКП-3.19.B/ТКП-1.19.B-2/ТКП-1.19.B-2.kicad_pcb
Commit: 9a9c1b3
Homepage: vk.com/stompboxes
Licence: Not stated

Parts

Qty	Value	Footprint	References
6	103	KCL-TH-SL:R-MFR-25	R3, R4, R5, R8, R13, R18
6	DI5M3x18	KCL-TH-SL:VMH-STA-DA5-PNL-3.0	VMH1, VMH2, VMH3, VMH4, VMH5, VMH6
5	102	KCL-TH-SL:R-MFR-25	R6, R9, R12, R15, R16
3	104	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C2, C4, C13
3	4148	KCL-TH-SL:P-DO-35	VD2, VD3, VD4
3	X	KCL-TH-SL:CON-PAD-S-1.0-2.0	X1, X2, X3
2	0.5	KCL-TH-SL:J-TH-d0.5-P07.62	J1, J2
2	105	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C6, C12
2	106	SBKCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5-OR-CP-RADIAL-D05.0-P02.0-CLS	C7, C14
2	223	KCL-TH-SL:R-MFR-25	R10, R11
2	476	KCL-TH-SL:CP-RADIAL-D05.0-P02.0-CLS	C1, C3
2	564	KCL-TH-SL:R-MFR-25	R7, R17
2	7000	KCL-TH-SL:P-TO-92-S-G-D	VT2, VT3
2	MPSA18	KCL-TH-SL:P-TO-92-E-B-C	VT1, VT4
2	MTS-102-A2	KCL-TH-SL:SW-MTS-102-A2-2.5-PNL-6.0	SA1, SA3
2	ST-008S-05	SBKCL-TH-SL:CON-ST-008X-04-OR-ST-008X-05	XS2, XS3
1	101	KCL-TH-SL:R-MFR-25	R19
1	105	KCL-TH-SL:R-MFR-25	R2
1	154	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C9
1	224	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C5
1	331	KCL-TH-SL:R-MFR-25	R14
1	334	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C11
1	4558	KCL-TH-SL:P-DIP-08	D1
1	470	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C8
1	472	KCL-TH-SL:R-MFR-25	R1
1	5817	KCL-TH-SL:P-DO-41	VD1
1	683	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C10
1	B100K-B5K-A500K	SBKCL-TH-SL:RPB-1590BB-18-3x17-1.5-PNL-7.2	RPB1
1	BR-12.7	KCL-VIRTUAL:VLS-BR	VLS1
1	COM	KCL-TH-SL:CON-PAD-S-1.0-2.0	X4
1	DC-005	KCL-TH-SL:CON-DC-005	XS1
1	FYL-5013URC	KCL-TH-SL:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3	HL1
1	FYL-5013URC	KCL-TH-SL:LED-ROUND-05.0-UNI-BH	HL2
1	MTS-103-A2	KCL-TH-SL:SW-MTS-103-A2-2.5-PNL-6.0	SA2
1	PBS-24-302SP	KCL-TH-SL:SW-PBS-24-302SP-2.5-PNL-12.0	SB1
1	X	KCL-VIRTUAL:B-PP3-HV	GB1
1	ТКП-6.1.1.A1.B1.A.1-2	SBEPL:ТКП-6.1.1.A1.B1.A	VE1
1	ТКП-6.1.3.A2.A1.2-2.C1.A1	SBEPL:ТКП-6.1.3.A2	VE2

Similar boards

2 layers61.7 × 57.4 mm
Compressor-01-bearhug
bubbajfett/kicad-guitar-pedals
collection of guitar pedal PCB layouts in kicad
37 parts17CC0-1.0
4 layers87.3 × 56.7 mm
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT
2 layers149.9 × 55.9 mm
Pc amplifier
dilshan/arduino-mini-amp
Arduino based stereo audio amplifier system
140 parts67MIT
2 layers99.5 × 75.9 mm
Amp
hack-apollo/hack_amp
50W stereo power amplifier(TPA3116).
79 parts38GPL-3.0
4 layers76 × 100 mm
Chlorine revD
kanengomibako/Chlorine

206 parts11Unlicense
2 layers70 × 57 mm
VFD MQTT
Estylos/VFD-MQTT
Control of a VFD in MQTT with an ESP8266 and Discord.
42 parts2MIT
2 layers78.5 × 60.8 mm
Tachometer
PotatoX/Band_Saw_Conversion
Cheap benchtop wood cutting band saw -> decent metal cutting
64 parts1
2 layers30 × 50 mm
FAN PCB
alexgvg/FAN-PCB
Leiterkarte für FAN Stromverteilung
23 parts

Questions

How big is the ТКП-1.19.B-2 PCB?

It measures 86.4 × 95.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.19.B-2 use?

68 parts, built around the MPSA18RL and DC-005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.19.B-2 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.19.B/ТКП-1.19.B-2/ТКП-1.19.B-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.19.B-2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.

Overview

Main components

MPSA18RL

DC-005

README

-ТТКРЧПДЛ- / Тут короче педали

Big Muff [REV3]

Bass

Bass SM

NYC

NYC SM

Big Muff [REV2]

Bass

NYC

Crumbwave Multiplexer [REV1]

Deep Blue Delay [REV3]

[REV3C]

[C]

[C] SM

[REV3B]

[B]

[B] SM

Distortion + [REV2]

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

[A]

[A] SM

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Main Board [REV1C] / Potentiometer Board [REV1B]

Main Board [REV1B] / Potentiometer Board [REV1B]

Good Grief Overdrive [REV1]

[REV1B]

[B]

[B] SM

[REV1A]

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

[B] Down-Tuned

[B] Down-Tuned SM

[B] Standard-Tuned

[B] Standard-Tuned SM

[REV1A]

[A] Down-Tuned

[A] Standard-Tuned

Крыса [REV1]

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Авторы

Лицензии

Parts

More from Adept666/stompboxes

Similar boards

Questions

How big is the ТКП-1.19.B-2 PCB?

What parts does the ТКП-1.19.B-2 use?

Where can I download the ТКП-1.19.B-2 KiCad files?

Can I use the ТКП-1.19.B-2 design in my own project?