Skip to the content
2 layers58.4 × 85.1 mmТКП-1.13.A-2, the printed circuit board in 3D

ТКП-1.13.A-2

Adept666/stompboxes10

-ТТКРЧПДЛ-

Size
58.4 × 85.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
63
Nets
44
Pads
146
Tracks, vias
215, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
28 Jun 2020
Updated
19 Oct 2026

Overview

ТКП-1.13.A-2 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 85.1 mm with 63 parts on 44 nets, routed with 215 tracks and 0 vias.

It is built around the DC-005S-T20. Its parts include 25 resistors, 15 capacitors and 3 crystals.

Main components

1

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Big Muff [REV3]

Gerber

Bass

Schematic

F_Fab

B_Fab

Bass SM

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

NYC SM

Schematic

F_Fab

B_Fab

Big Muff [REV2]

Gerber

Bass

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

Crumbwave Multiplexer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Schematic

F_Fab

B_Cuts

B_Jumpers

Gerber (Main Board)

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Schematic

F_Fab

B_Fab

Gerber

Little Angel Chorus [REV1]

Schematic

F_Fab

B_Fab

Gerber

Salty Phaser [REV1]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

F_Jumpers

B_Jumpers

Gerber

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

Schematic

F_Fab

B_Fab

Gerber

[REV1A]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

B_Jumpers

Gerber

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

  • Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.

  • Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.

  • Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Parts

63
QtyValueFootprintReferences
5104KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5C2, C5, C6, C9, C15
4104KCL-SM:R-SM-1206R5, R11, R16, R23
44148KCL-TH-SL:P-DO-35VD2, VD3, VD4, VD5
4474KCL-SM:R-SM-1206R6, R12, R17, R22
4547KCL-TH-SL:P-TO-92-E-B-CVT1, VT2, VT3, VT4
3103KCL-SM:R-SM-1206R10, R15, R24
3123KCL-SM:R-SM-1206R7, R13, R18
3391KCL-SM:R-SM-1206R8, R14, R19
3471KCL-SM:C-SM-1206C4, C8, C11
2105KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5C3, C14
2223KCL-SM:R-SM-1206R20, R21
2683KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5C7, C10
2A100KSBKCL-TH-SL:RPB-18-1x17-1.5-PNL-7.4-2.8RP1, RP3
2PJ-644CKCL-TH-SL:CON-PJ-644CXS1, XS2
1+KCL-TH-SL:CON-PAD-S-1.0-2.0X1
1-KCL-TH-SL:CON-PAD-S-1.0-2.0X2
1102KCL-SM:R-SM-1206R9
1103KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5C13
1103KCL-TH-SL:R-MFR-12R1
1105KCL-TH-SL:R-MFR-12R2
1106KCL-TH-SL:CP-RADIAL-D05.0-P02.0-CLSC1
1272KCL-SM:R-SM-1206R25
1332KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5C12
1393KCL-SM:R-SM-1206R4
15817KCL-TH-SL:P-DO-41VD1
1B013SBEL:B013_B1VE1
1B100KSBKCL-TH-SL:RPB-18-1x17-1.5-PNL-7.4-2.8RP2
1BR-17.8KCL-VIRTUAL:VLS-BRVLS1
1COMKCL-TH-SL:CON-PAD-S-1.0-2.0X3
1DC-005SKCL-TH-SL:CON-DC-005SXP1
1FYL-5013UWCKCL-TH-SL:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3HL1
1PBS-24-302SPKCL-TH-SL:SW-PBS-24-302SP-3.0-PNL-13.0SB1
1PP3KCL-VIRTUAL:B-PP3-HVGB1
1XKCL-TH-SL:R-MFR-12R3

More from Adept666/stompboxes

12
  • 2 layers86.4 × 111.8 mmТКП-1.23.B-1, the printed circuit board in 3D

    ТКП-1.23.B-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    214 parts10
  • 2 layers86.4 × 111.8 mmТКП-1.23.A-1, the printed circuit board in 3D

    ТКП-1.23.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    160 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-2, the printed circuit board in 3D

    ТКП-1.38.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    122 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-1, the printed circuit board in 3D

    ТКП-1.38.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    121 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.37.A-1, the printed circuit board in 3D

    ТКП-1.37.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    118 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-3, the printed circuit board in 3D

    ТКП-1.36.A-3

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-5, the printed circuit board in 3D

    ТКП-1.36.A-5

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-2, the printed circuit board in 3D

    ТКП-1.36.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    93 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-2, the printed circuit board in 3D

    ТКП-1.21.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    82 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-1, the printed circuit board in 3D

    ТКП-1.21.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    81 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-2, the printed circuit board in 3D

    ТКП-1.17.C-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    76 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-1, the printed circuit board in 3D

    ТКП-1.17.C-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    75 parts10

Similar boards

  • 2 layers143.3 × 116.6 mmLeft, the printed circuit board in 3D

    Left

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    63 parts915
  • 2 layers107 × 54 mmInterface board 1, the printed circuit board in 3D

    Interface board 1

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    63 parts756
  • 2 layers81.9 × 39.8 mmCAUTION LIGHTS PANEL, the printed circuit board in 3D

    CAUTION LIGHTS PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    63 parts431
  • 2 layers76.3 × 122.8 mmDiscipad pcb, the printed circuit board in 3D

    Discipad pcb

    coseyfannitutti/discipad

    17-key numpad assembled with only through hole components, including usb type-c

    63 parts221GPL-3.0
  • 2 layers53 × 47 mmServo control, the printed circuit board in 3D

    Servo control

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    63 parts208
  • 2 layers98 × 38 mmBldc control ver2, the printed circuit board in 3D

    Bldc control ver2

    pekkaroi/bldc-drive

    Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller

    63 parts199GPL-2.0
  • 2 layers60 × 75 mmMakennbot, the printed circuit board in 3D

    Makennbot

    idlehandsdev/makennbot

    A neural network bot for Make

    63 parts175

Questions

How big is the ТКП-1.13.A-2 PCB?

It measures 58.4 × 85.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.13.A-2 use?

63 parts, built around the DC-005S-T20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.13.A-2 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.13.A/ТКП-1.13.A-2/ТКП-1.13.A-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.13.A-2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.