2 layers70 × 90 mm
4 layers60 × 22 mm
Hypersonic pcb
adaand00/Hypersonic1Platform for audio development with ESP32-S3
- Size
- 60 × 22 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 38
- Nets
- 74
- Pads
- 264
- Tracks, vias
- 802, 175
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Apr 2024
- Updated
- 29 May 2024
Overview
Hypersonic pcb is an open-source printed circuit board by adaand00, from the adaand00/Hypersonic repository on GitHub, published under the MIT licence. It is a 4-layer board of 60 × 22 mm with 38 parts on 74 nets, routed with 802 tracks and 175 vias.
It is built around the ESP32-S3-WROOM-1-N8, TLV320AIC3101EVM and MIC5504-1.8YM5-TR, with the TLV1117-33DCY and TPD3S014DBV among its other parts. Its parts include 15 capacitors, 7 resistors, 6 ICs, 3 diodes and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
5
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTLV320AIC3101EVM
-- V-Audio Modules ROHSTexas InstrumentsV-Audio Modules
MIC5504-1.8YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 175uVrms 300mA 380mV@(300mA) 5.5V 55uA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTLV1117-33DCY
UncategorisedTexas Instruments
TPD3S014DBV
SOT-23-6-40℃~+125℃ 20nA 4.5V~5.5V 500mA Not supported Not supported Soft-start、Under-voltage lockout、Overcurrent Protection、Short-Circuit Protection、Reverse current blocking、Output discharge function SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
README
README.mdHypersonic
Platform for audio development with ESP32-S3, Work in progress.
Design goals: Modularity. Flexibility. High Fidelity.
Based on previous project: Supersonic Quantumbox
Development progress:
Hardware
- ESP32-s3 + CODEC module (
/Hypersonic_pcb) - Pedal with screen, potentiometers, and connetors. (
/Hypersonic_pedal_pcb) - Assembled
- Fully tested
Software
- Peripheral drivers
- FreeRTOS system
- User interface
Effects
- Saturation (Overdrive/Fuzz)
- VU meter
- Linear filters
- Compression
- Rotary speaker
- Wah-wah
- Echo/Reverb
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C7, C9, C12, C13, C14 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C10 |
| 4 | 1u | Capacitor_SMD:C_1210_3225Metric | CF1, CF2, CF3, CF4 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C11, C15 |
| 2 | 2K2 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | D_Schottky_Small | Diode_SMD:D_SOD-323_HandSoldering | D2, D3 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | BFC | Capacitor_SMD:C_Elec_6.3x5.8 | C8 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1U | U1 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | MIC5504-1.8YM5 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1 |
| 1 | NCV8114ASN280T1G | Package_TO_SOT_SMD:TSOT-23-5 | U4 |
| 1 | NGFF-BOARD-EDGE | FPlib:NGFF_B+M | J2 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | TLV320AIC3101 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U5 |
| 1 | TPD3S014 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Questions
How big is the Hypersonic pcb PCB?
It measures 60 × 22 mm and has 4 copper layers, 0.8 mm thick.
What parts does the Hypersonic pcb use?
38 parts, built around the ESP32-S3-WROOM-1-N8, TLV320AIC3101EVM, MIC5504-1.8YM5-TR and TLV1117-33DCY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hypersonic pcb KiCad files?
From the adaand00/Hypersonic repository on GitHub, at the commit this page was made from: the board is Hypersonic_pcb/Hypersonic_pcb.kicad_pcb and its schematic Hypersonic_pcb/Hypersonic_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hypersonic pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from adaand00/Hypersonic
1Similar boards
- 2 layers104.1 × 58.4 mm
- 4 layers94 × 79.6 mm
- 4 layers170 × 170 mm
ODROID H3-mITX adapter
rubenbaldewsing/ODROID-H3-mITX-adapter
Adapter board for mounting the ODROID H3(+) onto mITX formfactor. Including onboard LAN management, UART (BIOS) terminal and other features.
66 parts1MIT - 4 layers100 × 100 mm
- 6 layers100 × 75 mm
STM32H743
sneakylizard123-4/STM32H743
This board puts an STM32H743XIH6 and an iCE40 UP5K on the same PCB. The H743 handles control, USB, Ethernet, storage, and audio.
171 partsCERN-OHL-P-2.0 - 6 layers135.2 × 94.2 mm
- 6 layers83.3 × 61.3 mm
- 4 layers123 × 91 mm
