2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k
2 layers80 × 60 mm
Magnetometer
acrerd/magnetometer-boardPrinted circuit board design for the magnetometer honours project
- Size
- 80 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 13
- Pads
- 73
- Tracks, vias
- 150, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Oct 2017
- Updated
- 23 Oct 2017
Overview
Magnetometer is an open-source printed circuit board by acrerd, from the acrerd/magnetometer-board repository on GitHub. It is a 2-layer board of 80 × 60 mm with 31 parts on 13 nets, routed with 150 tracks and 1 via.
Its parts include 10 resistors, 6 capacitors, 5 connectors and 2 ICs.
README
README.mdMagnetometer schematic and printed circuit board
Printed circuit board design for the magnetometer honours project
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R4, R5, R7, R8, R9 |
| 4 | 100n | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C3, C4, C5, C6 |
| 2 | 1u | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C1, C2 |
| 2 | TL071 | Housings_DIP:DIP-8_W7.62mm | U1, U2 |
| 1 | 10k | Potentiometers:Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV1 |
| 1 | 15k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R10 |
| 1 | 180k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R6 |
| 1 | 330R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |
| 1 | 3k3 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3 |
| 1 | Coil | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P5 |
| 1 | Feedback | Pin_Headers:Pin_Header_Straight_1x02 | JP1 |
| 1 | LED | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P2 |
| 1 | Lock | Pin_Headers:Pin_Header_Straight_1x02 | JP2 |
| 1 | Monitor | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P4 |
| 1 | NP | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | Photodiode | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P3 |
| 1 | Power | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-3pol | P1 |
| 1 | V_Coil | Wire_Pads:SolderWirePad_single_1-2mmDrill | W3 |
| 1 | V_Error | Wire_Pads:SolderWirePad_single_1-2mmDrill | W2 |
| 1 | V_PD | Wire_Pads:SolderWirePad_single_1-2mmDrill | W1 |
| 1 | Val** | Board_Outlines:80mmx60mm_holes | Ref** |
The 30 most common of 31 parts.
Questions
How big is the Magnetometer PCB?
It measures 80 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Magnetometer use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magnetometer KiCad files?
From the acrerd/magnetometer-board repository on GitHub, at the commit this page was made from: the board is hardware/magnetometer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magnetometer design in my own project?
Its repository states no licence, so its author keeps all rights: ask acrerd before reusing the design.
Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm
- 2 layers103 × 55 mm
