2 layers138.1 × 114.3 mm
2 layers68 × 86.5 mm
ChaosBot
acharya-dilip/justanotherpcbThis is a PCB that holds chaos press the button to get a glimpse of what it holds and beware it may jump or rant at you
- Size
- 68 × 86.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 16
- Pads
- 61
- Tracks, vias
- 134, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jun 2025
- Updated
- 18 Jul 2025
Overview
ChaosBot is an open-source printed circuit board by acharya-dilip, from the acharya-dilip/justanotherpcb repository on GitHub. It is a 2-layer board of 68 × 86.5 mm with 67 parts on 16 nets, routed with 134 tracks and 0 vias.
Its parts include 6 diodes, 2 capacitors, 2 transistors and 1 switch.
README
README.mdJustanotherpcb
This is a PCB that holds chaos press the button to get a glimpse of what it holds and beware it may jump or rant at you
Materials List:
LED's x6 Resistor (220) x6 Resistor (4.7k) x4 Resistor (47k) x2 Transistor (NPN) x2 Capacitor (10uf) x2 Push Switch x1 Mini Motor Disc x1 Buzzer x1 CR2032 Battery Cell x2
What Does It DO?
This small fella is powered by two batteries and holds 6 LED's a mini motor disc and a buzzer. With the help of an astable multivibrator constatly switches between two states when power is provided and while the switcherooo occurs LED's in groups of 3 flash on and off while the motor and the buzzer also turn on in small bursts in sync with the groups of LED's.
Some Glimpses
Made By DILIP ACHARYA
Slack ID: acharyamission6 Made in a ADHD Hyperfocus state. He'll spend the next month in recovery mode Peace!
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +23 |
| 6 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
| 6 | R_Small_LED | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RSD1, RSD2, RSD3, RSD4, RSD5, RSD6 |
| 2 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1, BT2 |
| 2 | C | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2 |
| 2 | NPN | Package_TO_SOT_THT:TO-92L_HandSolder | Q1, Q2 |
| 2 | R_Large_AMV | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RLA1, RLA2 |
| 2 | R_Small_amv | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RSA1, RSA2 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABI-009-RC | BZ1 |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | R_Small_buzzer | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RSB1 |
| 1 | R_Small_motor | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RSM1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
The 66 most common of 67 parts.
Questions
How big is the ChaosBot PCB?
It measures 68 × 86.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ChaosBot use?
67 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ChaosBot KiCad files?
From the acharya-dilip/justanotherpcb repository on GitHub, at the commit this page was made from: the board is ChaosBot.kicad_pcb and its schematic ChaosBot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ChaosBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask acharya-dilip before reusing the design.
Similar boards
- 2 layers133.1 × 53.8 mm
- 2 layers160 × 100.1 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 2 layers65 × 56 mm
Zpui shld wg12864b
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
67 parts253GPL-3.0 - 2 layers138.1 × 89.7 mm
- 2 layers51 × 30 mm
- 2 layers93.5 × 55 mm
- 2 layers58.4 × 101.6 mm
