Skip to the content
2 layers154.4 × 126.1 mmQapla choc, the printed circuit board in 3D

Qapla choc

achamian/qapla1

60 key split ortholinear keyboard

Size
154.4 × 126.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
73
Nets
83
Pads
603
Tracks, vias
582, 14
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 Aug 2024
Updated
10 Sep 2024

Overview

Qapla choc is an open-source printed circuit board by achamian, from the achamian/qapla repository on GitHub. It is a 2-layer board of 154.4 × 126.1 mm with 73 parts on 83 nets, routed with 582 tracks and 14 vias.

Its parts include 29 diodes and 29 switches. It belongs with the keyboards and input boards of this library.

README

README.md

Qapla

Qapla 60 key keyboard

Qapla is a 60 key keyboard with Choc or MX switches inspired by Lilly58 and Sofle. Columns have splay and stagger based on my cardboard mocks.

For designing the layout it uses

  • Ergogen to define layout, generate PCB and case.
  • Ceoloide Footprints to add footprints (It is a fork which adds via pads for diodes).
  • Routing is done in KiCad.

Components and Jumpers

MCU

  • Solder jumpers on the front if controller is mounted on top of the pcb facing it
  • Solder jumpers on the back if controller is mounted on top of the pcb facing away from it
  • Solder jumpers on the back if controller is mounted under the pcb facing it
  • Solder jumpers on the front if controller is mounted under the pcb facing away from it

Display

Qapla supports Nice!View reversible footprint. To use I2C OLED display instead of Nice!View connect display to inner four pins on the left half and outer four pins on the right half. Bridge jumpers on the opposite side of the display.

JST Battery Connector

Bridge jumpers on the opposite side of the connector. Note the polarity when connecting the battery.

Bill of Materials

QuantityComponentNotes
2PCBLeft and right halves
2Pro Micro compatible MCUe.g., Nice!Nano for wireless
60Choc or MX switchesDepending on preference
60Diodes (1N4148 or similar)SOD-123
2Reset switches
2JS102011SAQN SMT slide switch
2Nice!View or OLED displaysOptional
56Keycaps 1uCompatible with chosen switches
4Keycaps 1.5uCompatible with chosen switches
10M2 3mm screwsFor case assembly
10M2 heat inserts OD: 3.2mm, Length: 3mmFor case assembly AliExpress
2Blue SMD standard LED0805(2012 metric) - Optional - Battery Indicator
2220 Ohm SMD resistors0805(2012 metric) - Optional - Battery Indicator

Links

Firmware

Parts

73
QtyValueFootprintReferences
29ceoloide:diode_tht_sod123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +13
29ceoloide:switch_choc_v1_v2S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +13
5ceoloide:mounting_hole_platedH1, H2, H3, H4, H5
2ceoloide:mounting_hole_npthMH1, MH2
1reset_switch_1
1ceoloide:mcu_nice_nanoMCU1
1ceoloide:battery_connector_jst_ph_2JST1
1D_0805_2012Metric_Pad1.15x1.40mm_HandSolder_3
1switch_JS102011SAQN_2
1footprints:batleth
1R_0805_2012Metric_Pad1.20x1.40mm_HandSolder_3
1ceoloide:display_nice_viewDISP1

More from achamian/qapla

1
  • 2 layers164.2 × 137.2 mmQapla mx, the printed circuit board in 3D

    Qapla mx

    achamian/qapla

    60 key split ortholinear keyboard

    114 parts1

Similar boards

  • 2 layers131.2 × 132.5 mmMacropad, the printed circuit board in 3D

    Macropad

    earthtojake/text-to-cad

    Design physical products with AI

    73 parts26kMIT
  • 2 layers76 × 112 mmLaunch heavy, the printed circuit board in 3D

    Launch heavy

    system76/launch

    System76 Launch Configurable Keyboard

    73 parts1.4kGPL-3.0
  • 2 layers152.9 × 58.6 mmMini sequencer, the printed circuit board in 3D

    Mini sequencer

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    73 parts915
  • 2 layers128.6 × 74.2 mmFUEL PANEL, the printed circuit board in 3D

    FUEL PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    73 parts431
  • 2 layers84 × 75 mmSmu amp 1, the printed circuit board in 3D

    Smu amp 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    73 parts244
  • 2 layers62 × 60.5 mmChiller control, the printed circuit board in 3D

    Chiller control

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    73 parts208
  • 2 layers247.7 × 105.6 mmAsfoora, the printed circuit board in 3D

    Asfoora

    AlaaSaadAbdo/battoota

    Keyboards

    73 parts188
  • 2 layers157 × 90 mmErgoTravel, the printed circuit board in 3D

    ErgoTravel

    FIXMBR/ErgoTravelXT

    Portable, low profile keyboard with extra XT60s.

    73 parts130GPL-3.0

Questions

How big is the Qapla choc PCB?

It measures 154.4 × 126.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Qapla choc use?

73 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Qapla choc KiCad files?

From the achamian/qapla repository on GitHub, at the commit this page was made from: the board is v1/pcb/qapla_choc/qapla_choc.kicad_pcb and its schematic v1/pcb/qapla_choc/qapla_choc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Qapla choc design in my own project?

Its repository states no licence, so its author keeps all rights: ask achamian before reusing the design.