2 layers53 × 20 mm
2 layers80 × 60 mm
ETH2Zigbee
acha666/ETH2Zigbee- Size
- 80 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 101
- Pads
- 323
- Tracks, vias
- 629, 152
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Jun 2024
- Updated
- 18 Jun 2024
Overview
ETH2Zigbee is an open-source printed circuit board by acha666, from the acha666/ETH2Zigbee repository on GitHub. It is a 2-layer board of 80 × 60 mm with 71 parts on 101 nets, routed with 629 tracks and 152 vias.
It is built around the E72-2G4M20S1E, ESP32-WROOM-32UE-N16 and HLK-5M05, with the CH342K, LAN8720A-CP and RT9187GQV among its other parts. Its parts include 23 resistors, 20 capacitors, 6 ICs, 5 switches and 4 diodes. It belongs with the ESP32 boards of this library.
Main components
10
E72-2G4M20S1E
-Module reset function、Integrated antenna、AES encryption、Restore factory settings function - RF Modules ROHSChengdu Ebyte Elec TechRF Modules
ESP32-WROOM-32UE-N16
SMD,18x19.2mm-40℃~+85℃ -98dBm 112mA 2.4GHz 20dBm 239mA 3V~3.6V Bluetooth4.2 ESP32-DOWD-V3、ESP32-DOWDR2-V3 UART、SDIO、SPI、I2C、GPIO SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
HLK-5M05
DIP,38x23mm0.1W 18mm 1A 23mm 38mm 3kV 50mVp-p 5V 5W 70% 70V~350V 85VAC~264VAC AC/DC-DC Short Circuit Protection、Over Current Protection ±0.2% DIP,38x23mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
CH342K
ESSOP-10-150mil-40℃~+85℃ 15mA 2 3.3V、5V 3Mbps 50uA USB 2.0 USB to serial ESSOP-10-150mil USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
LAN8720A-CP
QFN-24-EP(4x4)Ethernet ICsMicrochip Technology
RT9187GQV
DFN-8-EP(3x3)-40℃~+125℃@(Tj) -60dB@(100Hz)、-50dB@(10kHz) 1 1A 240mV@(1A) 380uA 5.5V 800mV~4.5V Adjustable Over Current Protection、Over Temperature Protection、Enable Positive DFN-8-EP(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TS5A23157DGSR
MSOP-10-40℃~+85℃ 1.65V~5.5V 1.7ns 10Ω 17.5pF 2 220MHz 2:1 800ps MSOP-10 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
10D561K
插件,P=7.5mm180pF@1kHz 2.5kA 350V 460V 504V~616V 70J 925V 插件,P=7.5mm Varistors ROHSSURGINGVaristors
HR911105A
插件0℃~+70℃ 1 Filtered Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSHANRUNEthernet Connectors / Modular Connectors (RJ45 RJ11)
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5, C8, C12, C14, C17, C18, C19, C20 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R12, R13, R14, R17, R20, R21 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R10, R11, R15, R16 |
| 4 | MountingHole_2.2mm_M2_ISO7380_Pad | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | , , , |
| 4 | SW_Push | ETH2Zigbee:SW_Push_SPST_NO_Alps_SKRK | SW2, SW3, SW4, SW5 |
| 3 | 0R | Resistor_SMD:R_0402_1005Metric | R1, R23, R24 |
| 3 | 5.1K | Resistor_SMD:R_0402_1005Metric | R2, R3, R19 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C11, C13 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 33R | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | SS14 | Diode_SMD:D_SMA | D1, D2 |
| 1 | 0.5A/250V | ETH2Zigbee:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | 1.5K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10D561K | Varistor:RV_Disc_D12mm_W7.1mm_P7.5mm | RV1 |
| 1 | 12.1K/1% | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 120R/1A | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | 16K | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 1nF/2KV | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 220uF/6.3V | Capacitor_SMD:CP_Elec_6.3x5.4 | C3 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 50MHz | ETH2Zigbee:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | CH342K | Package_SO:SSOP-10_3.9x4.9mm_P1.00mm | U1 |
| 1 | Conn_01x02 | ETH2Zigbee:CONN-TH_2P-P5.00_WJ500V-5.08-2P | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | E72-2G4M20S1E | ETH2Zigbee:WIRELM-SMD_E72-2G4M20S1E | U7 |
| 1 | ESP32-WROOM-32UE-N16 | ETH2Zigbee:WIFI-SMD_ESP32-WROOM-32E | U2 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | HLK-5M05 | ETH2Zigbee:PWRM-TH_HLK-5M05 | PS1 |
| 1 | HR911105A | ETH2Zigbee:RJ45-TH_HR911105A | J3 |
| 1 | LAN8720A | ETH2Zigbee:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U4 |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | RT9187GQV | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U5 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01A_W5.08mm_P1.27mm_JPin | SW1 |
| 1 | TS5A23157DGS | Package_SO:MSOP-10_3x3mm_P0.5mm | U6 |
| 1 | USB_C_Receptacle_USB2.0 | ETH2Zigbee:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
Questions
How big is the ETH2Zigbee PCB?
It measures 80 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ETH2Zigbee use?
71 parts, built around the E72-2G4M20S1E, ESP32-WROOM-32UE-N16, HLK-5M05 and CH342K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ETH2Zigbee KiCad files?
From the acha666/ETH2Zigbee repository on GitHub, at the commit this page was made from: the board is ETH2Zigbee.kicad_pcb and its schematic ETH2Zigbee.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ETH2Zigbee design in my own project?
Its repository states no licence, so its author keeps all rights: ask acha666 before reusing the design.
Similar boards
- 2 layers53 × 30 mm
Watermeter zigbee
pifactory/watermeter
Design files for making inductive sensor for reading out smart water meters.
11 parts12CC-BY-4.0 - 2 layers40 × 68 mm
MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 2 layers135.3 × 211.3 mm
ESP32 Sprinkle Timer
rgodin974/ESP32_sprinkler_timer
Coded on PlateformIO and VS Code. Project based on RitonDuino : https://riton-duino.blogspot.com/2023/08/esp32-micro-irrigation-connectee-partie.html
103 parts1 - 2 layers134.2 × 78.5 mm
- 2 layers200.3 × 96 mm
ESP32C5 iot switch
mynameisbrozu/esp32-based-iot-switch
Personal project - Iot switch with esp32c5 and 3.7" epaper display
89 partsMIT - 2 layers105 × 58 mm
ZAP-01A
ponrajleo/AI-Hardware-ESP32S3-
This project is part of a complete open-source hardware design course on YouTube:
103 parts - 2 layers50 × 100 mm
Airtap
ajkumar-1907/POWER-ELECTRONICS-LIB
Open-source library of power electronics converter topologies — KiCad schematics, working principles, use cases, and design notes for DC-DC, AC-DC, DC-AC, and AC-AC converters. Free to use, modify, and build on.
62 parts1MIT