2 layers128 × 95 mm
2 layers126 × 92.5 mm
Traffic Light Controller
Acey0Ebs/KiCad_Traffic_Light_Controller- Size
- 126 × 92.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 63
- Pads
- 180
- Tracks, vias
- 384, 20
- Pours
- 241
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Apr 2026
- Updated
- 22 Apr 2026
Overview
Traffic Light Controller is an open-source printed circuit board by Acey0Ebs, from the Acey0Ebs/KiCad_Traffic_Light_Controller repository on GitHub. It is a 2-layer board of 126 × 92.5 mm with 65 parts on 63 nets, routed with 384 tracks and 20 vias.
It is built around the SM420561N, LM1117DT-3.3 and 1N4148W. Its parts include 32 resistors, 13 diodes, 5 capacitors, 4 connectors and 3 ICs.
Main components
3
SM420561N
插件-20℃~+80℃ 0.56 1 12.6mm 19mm 25mcd 2V 50mW 7 Segment 8mm Common Cathode Red 插件 LED Segment Displays ROHSARKLEDLED Segment Displays
LM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 130 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +10 |
| 6 | 47K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R27, R28, R29, R30, R31, R32 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 0.22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3 |
| 3 | 1N4148W | Diode_SMD:D_SOD-123 | D11, D12, D13 |
| 2 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1, J2 |
| 2 | SM420561N | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U1, U2 |
| 1 | +5V | my_footprints:Terminal_Block_5mm | J4 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.8 | C5 |
| 1 | 10u | Capacitor_SMD:CP_Elec_4x5.3 | C4 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | EN | my_footprints:slide_switch_2.54mm | SW3 |
| 1 | EWC_GREEN | LED_THT:LED_D5.0mm | D4 |
| 1 | EWC_RED | LED_THT:LED_D5.0mm | D6 |
| 1 | EWC_YELLOW | LED_THT:LED_D5.0mm | D5 |
| 1 | EWP_GREEN | LED_THT:LED_D5.0mm | D9 |
| 1 | EWP_RED | LED_THT:LED_D5.0mm | D10 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | NSC_GREEN | LED_THT:LED_D5.0mm | D1 |
| 1 | NSC_RED | LED_THT:LED_D5.0mm | D3 |
| 1 | NSC_YELLOW | LED_THT:LED_D5.0mm | D2 |
| 1 | NSP_GREEN | LED_THT:LED_D5.0mm | D7 |
| 1 | NSP_RED | LED_THT:LED_D5.0mm | D8 |
| 1 | OVR | my_footprints:slide_switch_2.54mm | SW2 |
| 1 | SW_Push | my_footprints:tact_switch_5mm | SW1 |
Similar boards
- 2 layers126.4 × 82.5 mm
- 2 layers107.8 × 82.1 mm
- 2 layers124.2 × 91.3 mm
- 2 layers117.3 × 89.7 mm
KiCad Traffic Light Controller
emolagaroxieelaine-del/KiCad_Traffic_Light_Controller_guide
64 partsMIT - 2 layers130.5 × 93.5 mm
- 2 layers119.9 × 95.2 mm
JLPCB 2layers
juliancientos/Logic-Circuit-Design
This folder contains projects including testing basic logic gates, writing digital logic code and testbenches, compiling the verilog, analyzing timing and mapping logic pins and designing the schematic and custom pcb…
64 partsMIT - 2 layers125.5 × 83 mm
Questions
How big is the Traffic Light Controller PCB?
It measures 126 × 92.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Traffic Light Controller use?
65 parts, built around the SM420561N, LM1117DT-3.3 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Traffic Light Controller KiCad files?
From the Acey0Ebs/KiCad_Traffic_Light_Controller repository on GitHub, at the commit this page was made from: the board is KiCad_Traffic_Light_Controller_main/Traffic_Light_Controller/Traffic_Light_Controller.kicad_pcb and its schematic KiCad_Traffic_Light_Controller_main/Traffic_Light_Controller/Traffic_Light_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Traffic Light Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Acey0Ebs before reusing the design.