2 layers80 × 130 mm
E003-capstan
KP1533TM2/e003-capstan
Блок управления ведущим двигателем Олимпа 003 с ФАПЧ, основанный на БУВД самодельного магнитофона TK-140 leoniv
130 parts1
2 layers120.4 × 140.2 mm
Cncdriver3axis
acassis/simplemaker2This is an evolve from TheMarker2 CNC replacing the PIC microcontroller by an Atmega
- Size
- 120.4 × 140.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 88
- Pads
- 250
- Tracks, vias
- 478, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 1 Dec 2013
- Updated
- 14 Feb 2014
Overview
Cncdriver3axis is an open-source printed circuit board by acassis, from the acassis/simplemaker repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 120.4 × 140.2 mm with 68 parts on 88 nets, routed with 478 tracks and 2 vias.
It is built around the ATMEGA328P-PU and CNY17-2. Its parts include 25 resistors, 12 diodes, 12 transistors, 7 ICs and 5 connectors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CNY17-2
DIP-6-55℃~+100℃ 1 1.45V 125% 150mA 300mV@2.5mA,10mA 5kV 5us 5us@2mA,100Ω 60mA 63% 6V 70V DC Phototransistor DIP-6 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
README
README.mdsimplemaker
This is my FirstCNC design!
It is based on http://www.thingiverse.com/thing:41594
This project started as an evolution from TheMarker2 CNC replacing the PIC microcontroller by an Atmega, but eventually I decided to move to this thingiverse design because it is more robust.
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1K | R3 | R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 |
| 12 | 1N4007 | D3 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | SUP85N03 | TO220_VERT_GDS | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 7 | 1k | R3 | R7, R8, R9, R10, R11, R12, R13 |
| 6 | 200 | R3 | R1, R2, R3, R4, R5, R6 |
| 6 | CNY17-2 | DIP-6__300 | U1, U2, U3, U4, U5, U6 |
| 3 | CONN_5 | bornier5 | P3, P4, P6 |
| 2 | 22pF | C1 | C2, C3 |
| 1 | 220n | C1 | C1 |
| 1 | ATMEGA328P-P | DIP-28__300 | IC1 |
| 1 | CENTRONICS_F | CENTRONICS_F | P1 |
| 1 | CONN_3 | bornier3 | K2 |
| 1 | CONN_3 | PIN_ARRAY_3X1 | K3 |
| 1 | CONN_5 | PIN_ARRAY_5x1 | P7 |
| 1 | CRYSTAL | HC-49V | X1 |
| 1 | SW_PUSH | SW_PUSH_SMALL | SW1 |
Questions
How big is the Cncdriver3axis PCB?
It measures 120.4 × 140.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cncdriver3axis use?
68 parts, built around the ATMEGA328P-PU and CNY17-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cncdriver3axis KiCad files?
From the acassis/simplemaker repository on GitHub, at the commit this page was made from: the board is board/cncdriver3axis.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cncdriver3axis design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers101 × 70 mm
- 2 layers58.5 × 32 mm
UVTimer
willy40/UVTimer
ESP32-based BLE timer replacement for NE555 in UV nail lamps. Features Android app control and BT136 triac switching.
10 partsMIT - 2 layers50 × 86.5 mm
- 2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269 - 2 layers76.3 × 122.8 mm
Discipad pcb
coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c
63 parts221GPL-3.0 - 2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers247.6 × 99.2 mm
Romeo pcb
coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C
138 parts148GPL-3.0