2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers
Phyether
acassis/phyether1This is an Ethernet PHY board based on Andy Brown board.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 59
- Pads
- 163
- Tracks, vias
- 345, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Aug 2014
- Updated
- 19 Aug 2014
Overview
Phyether is an open-source printed circuit board by acassis, from the acassis/phyether repository on GitHub, published under the MIT licence. It is a 2-layer board with 43 parts on 59 nets, routed with 345 tracks and 10 vias.
It is built around the RJ45. Its parts include 19 resistors, 13 capacitors, 4 connectors, 3 diodes and 2 inductors. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdphyether
This is an Ethernet PHY board based on Andy Brown board: http://andybrown.me.uk/wk/2012/09/01/ethernet-phy-stm32f107/
I used KiCAD to develop this board. KiCAD is open-source and it is a very powerful EDA software.
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 33 | SMD_Packages:SM0603_Resistor | R4, R5, R6, R7, R8, R9, R12, R13, R14, R18 |
| 7 | 100nF | Capacitors_SMD:c_0603 | C2, C3, C5, C6, C9, C11, C12 |
| 3 | 220 | SMD_Packages:SM0603_Resistor | R15, R16, R19 |
| 2 | 0R | SMD_Packages:SM0603_Resistor | R1, R3 |
| 2 | 22uF | Capacitors_SMD:c_0805 | C1, C10 |
| 2 | ferrite bead | SMD_Packages:SM0603 | L1, L2 |
| 1 | 10K | SMD_Packages:SM0603_Resistor | R2 |
| 1 | 1K | SMD_Packages:SM0603_Resistor | R11 |
| 1 | 2.2uF | Capacitors_SMD:c_0603 | C4 |
| 1 | 25MHz | Crystals:Crystal_HC49-SD_SMD | X1 |
| 1 | 30pF | Capacitors_SMD:c_0603 | C8 |
| 1 | 30pF | Capacitors_SMD:c_0603 | C7 |
| 1 | 4.7K | SMD_Packages:SM0603_Resistor | R17 |
| 1 | 47uF | Capacitors_Tantalum_SMD:TantalC_SizeD_EIA-7343_HandSoldering | C13 |
| 1 | 6.49K | SMD_Packages:SM0603_Resistor | R10 |
| 1 | CONN_10 | Pin_Headers:Pin_Header_Straight_1x10 | P1 |
| 1 | CONN_11 | Pin_Headers:Pin_Header_Straight_1x11 | P2 |
| 1 | CONN_8 | Pin_Headers:Pin_Header_Straight_1x08 | P3 |
| 1 | KSZ8081 | QFP:lqfp-48 | U1 |
| 1 | LED COLISION | LEDs:LED-0603 | D2 |
| 1 | LED SPEED | LEDs:LED-0603 | D1 |
| 1 | POWER | LEDs:LED-0603 | D3 |
| 1 | RJ45 | Connect:RJ45_8 | J1 |
Questions
What parts does the Phyether use?
43 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phyether KiCad files?
From the acassis/phyether repository on GitHub, at the commit this page was made from: the board is ethernet/phyether.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phyether design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers84 × 82 mm
Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm
- 2 layers50 × 55.4 mm
- 2 layers67.9 × 47.8 mm
Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm
- 4 layers73.9 × 84.5 mm
Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm
Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46