

Blackmagicprobe
WIP
- Size
- 16.3 × 39.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 21
- Pads
- 118
- Tracks, vias
- 181, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Sep 2018
- Updated
- 17 Jul 2019
Overview
Blackmagicprobe is an open-source printed circuit board by acalinp, from the acalinp/CANopener repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 16.3 × 39.5 mm with 29 parts on 21 nets, routed with 181 tracks and 30 vias.
It is built around the SC662K-3.3V. Its parts include 9 capacitors, 9 resistors, 4 diodes, 2 ICs and 2 connectors. It belongs with the STM32 boards of this library.
Main components
1Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitors_SMD:C_0603 | C2, C3, C7, C8 |
| 4 | 330 | Resistors_SMD:R_0603 | R6, R7, R8, R9 |
| 3 | 22uF | Capacitors_SMD:C_0805 | C1, C4, C9 |
| 2 | 10k | Resistors_SMD:R_0603 | R2, R3 |
| 2 | 22 | Resistors_SMD:R_0603 | R4, R5 |
| 2 | 22pF | Capacitors_SMD:C_0603 | C5, C6 |
| 2 | SW_SPST | Buttons_Switches_SMD:SW_SPST_B3U-3000P-B | SW1, SW2 |
| 1 | 1.5k | Resistors_SMD:R_0603 | R1 |
| 1 | 8MHz | Crystals:Crystal_SMD_5032-2pin_5.0x3.2mm | Y1 |
| 1 | Green | LEDs:LED_0603 | D1 |
| 1 | Orange | LEDs:LED_0603 | D3 |
| 1 | Red | LEDs:LED_0603 | D2 |
| 1 | SC662K | TO_SOT_Packages_SMD:SOT-23_Handsoldering | U1 |
| 1 | STM32F072CBTx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | SWD | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | J2 |
| 1 | USB_B_Micro | Connectors_USB:USB_Micro-B_Wuerth-629105150521 | J1 |
| 1 | Yellow | LEDs:LED_0603 | D4 |
More from acalinp/CANopener
1- 2 layers33.5 × 63.1 mm

Similar boards
- 2 layers43.4 × 18.8 mm

Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers24.4 × 11.2 mm

M484-dap
flipperdevices/flipperzero-good-faps
Flipper Zero Official Apps maintained by Flipper Team and Friends
28 parts489GPL-3.0 - 2 layers26.2 × 12.7 mm

- 2 layers25.4 × 29.3 mm

- 2 layers52.3 × 10.5 mm

StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0 - 2 layers56 × 20 mm

HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm

Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm

E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915
Questions
How big is the Blackmagicprobe PCB?
It measures 16.3 × 39.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Blackmagicprobe use?
29 parts, built around the SC662K-3.3V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Blackmagicprobe KiCad files?
From the acalinp/CANopener repository on GitHub, at the commit this page was made from: the board is Hardware/black-magic-probe-debugger/blackmagicprobe/blackmagicprobe.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Blackmagicprobe design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).