

Sim7080g
A0 IoT Gateway
- Size
- 25.4 × 57.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 77
- Pads
- 210
- Tracks, vias
- 552, 131
- Pours
- 255
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Nov 2024
- Updated
- 23 Sep 2026
Overview
Sim7080g is an open-source printed circuit board by absmach, from the absmach/a0 repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 25.4 × 57.2 mm with 57 parts on 77 nets, routed with 552 tracks and 131 vias.
It is built around the SIM7080G, TXB0108RGY and ESD9B5.0ST5G, with the ESDA6V1SC5 among its other parts. Its parts include 12 capacitors, 12 resistors, 5 diodes, 4 connectors and 3 ICs. It belongs with the radio and wireless boards of this library.
Main components
4SIM7080G
SMD,17.6x15.7mm2.7V~4.8V B2、B3、B1 I2C、USB、UART、PCM、SPI NB-IoT、CAT-M PCM语音功能 SMD,17.6x15.7mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G ModulesTXB0108RGY
VQFN-20-EP(3.5x4.5)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 8 Automatic direction detection、Power-off protection、Output enable high-impedance Bidirectional Level translator Tri-State VQFN-20-EP(3.5x4.5) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)ESDA6V1SC5
SOT-23-5L-40℃~+125℃ 18A@8/20us 190pF 2uA 400W 5.25V 6.1V 6.1V ESD Four channels IEC 61000-4-2 Unidirectional SOT-23-5L ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
a0/README.mdA0 Base Board
A0 is the base board of the modular A0 IoT gateway, built around an ESP32-C6 module (RISC-V, Wi-Fi 6, Bluetooth 5, IEEE 802.15.4).
About the ESP32-C6
The ESP32-C6 is Espressif's first Wi-Fi 6 SoC, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE) and IEEE 802.15.4 (Thread/Zigbee) radio connectivity in a single low-power chip (product page).
| Spec | Details |
|---|---|
| CPU | High-performance 32-bit RISC-V core, up to 160 MHz, plus a low-power (LP) 32-bit RISC-V core, up to 20 MHz |
| Memory | 320 KB ROM, 512 KB SRAM, external flash |
| Wireless | 2.4 GHz Wi-Fi 6 (802.11ax, 20 MHz) with 802.11 b/g/n (20/40 MHz) backward compatibility; OFDMA up/downlink, downlink MU-MIMO, Target Wake Time (TWT); Bluetooth 5 LE with coded PHY long-range and 2 Mbps high-throughput PHY; IEEE 802.15.4 for Thread/Zigbee |
| GPIO | 30 (QFN40) or 22 (QFN32) programmable GPIOs |
| Peripherals | SPI, UART, I2C, I2S, RMT, TWAI, PWM, SDIO, Motor Control PWM, 12-bit ADC, temperature sensor |
| Security | RSA-3072 secure boot, AES-128/256-XTS flash encryption, digital signature and HMAC peripherals, hardware cryptographic accelerators, Trusted Execution Environment (TEE) for privilege/software separation |
| Software | Open-source ESP-IDF; ESP-Hosted / ESP-AT for co-processor use; ESP RainMaker; Zephyr support |
Wi-Fi 6 features (OFDMA, MU-MIMO, TWT) deliver low latency and long battery life even in congested RF environments, while combined Wi-Fi + BLE + 802.15.4 support makes it a natural fit for Matter end-point devices, Thread Border Routers, and Zigbee bridges.
Overview
A0 provides everything needed to power and run the gateway, while pushing all radio/cellular connectivity onto removable expansion modules:
- ESP32-C6 module on top — main compute + Wi-Fi/BLE/802.15.4 connectivity, with hardware secure boot, flash encryption, and a TEE.
- Power:
- USB-C power input
- External power supply input
- Battery support (with charging)
- Expansion: two module slots, BUS1 and BUS2, where any of the following modules can be plugged in:
- SIM7080G — NB-IoT/LTE-M cellular + GNSS
- WMBUS — Wireless M-Bus radio
- E07-400M10S — Sub-GHz radio (400 MHz, 10 dBm)
Manufacturing
Gerber and assembly outputs are in jlcpcb/ (gerber/ and production_files/).
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C10, C11, C12, C13 |
| 3 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5 |
| 3 | 22pF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C8 |
| 3 | 4.7K | Resistor_SMD:R_0805_2012Metric | R2, R8, R9 |
| 3 | 47K | Resistor_SMD:R_0805_2012Metric | R6, R10, R11 |
| 3 | NPN | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R7, R12 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1, J4 |
| 2 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D1, D5 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D3, D4 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C9 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | ESDA6V1SC5 | Package_TO_SOT_SMD:SOT-23-5 | D2 |
| 1 | G*** | kibuzzard-6A58AAD1 | kibuzzard-6A58AAD1 |
| 1 | G*** | kibuzzard-6A58AAC0 | kibuzzard-6A58AAC0 |
| 1 | G*** | kibuzzard-6A58AA08 | kibuzzard-6A58AA08 |
| 1 | G*** | kibuzzard-6A58AAA8 | kibuzzard-6A58AAA8 |
| 1 | G*** | kibuzzard-6A58ABD9 | kibuzzard-6A58ABD9 |
| 1 | G*** | kibuzzard-6A58ABCC | kibuzzard-6A58ABCC |
| 1 | G*** | kibuzzard-6A58AA90 | kibuzzard-6A58AA90 |
| 1 | G*** | kibuzzard-6A58AD62 | kibuzzard-6A58AD62 |
| 1 | G*** | kibuzzard-6A58ABE5 | kibuzzard-6A58ABE5 |
| 1 | G*** | kibuzzard-6A58ADF5 | kibuzzard-6A58ADF5 |
| 1 | G*** | kibuzzard-6A58AA2C | kibuzzard-6A58AA2C |
| 1 | G*** | kibuzzard-6A58AD87 | kibuzzard-6A58AD87 |
| 1 | G*** | kibuzzard-6A58ABC2 | kibuzzard-6A58ABC2 |
| 1 | G*** | kibuzzard-6A58AA80 | kibuzzard-6A58AA80 |
| 1 | G*** | kibuzzard-6A58ABB3 | kibuzzard-6A58ABB3 |
| 1 | NANO SIM XG6P H1.35 | modules:SIM-SMD_NANO-SIM | U3 |
| 1 | SIM7080G | modules:SIM7080G | U2 |
| 1 | TXB0108RGY | Package_DFN_QFN:Texas_RGY_R-PVQFN-N20_EP2.05x3.05mm | U1 |
More from absmach/a0
3- 4 layers54.6 × 86.3 mm

- 2 layers25.4 × 28.6 mm

- 2 layers25.4 × 28.6 mm

Similar boards
- 2 layers65.8 × 100.9 mm

- 6 layers230 × 56 mm

- 4 layers36 × 36 mm

- 2 layers99 × 99 mm

Pyramid of brightness
WilmervH/pyramid-of-brightness
This was supposed to be a pyramid (or more of a triagle) but I thought I'd be too difficult to arrange the pixels in a neat way. So I made it a square. The name stuck.
294 partsAGPL-3.0 - 2 layers34 × 96 mm

- 4 layers118.7 × 72.5 mm

Framework16-m2-cellular
Popax21/framework16-cellular
A M.2 cellular modem Expansion Bay module for the Framework Laptop 16
101 parts7GPL-3.0 - 4 layers96.9 × 73.9 mm

- 4 layers35 × 35 mm

Questions
How big is the Sim7080g PCB?
It measures 25.4 × 57.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sim7080g use?
57 parts, built around the SIM7080G, TXB0108RGY, ESD9B5.0ST5G and ESDA6V1SC5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sim7080g KiCad files?
From the absmach/a0 repository on GitHub, at the commit this page was made from: the board is modules/sim7080g/sim7080g.kicad_pcb and its schematic a0/a0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sim7080g design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).