
MacroController
alex1klimovich/nrf52840-macro-controller
Custom nRF52840 productivity controller for digital artists — PCB, BLE/USB firmware, OLED, haptics, RGB, and enclosure CAD.

The heatset inserts would be placed in all the holds to keep the case together and keep the pcb board in place! I have items poking out both the front side and the backside, so I'll need to be careful about that when…
Hackpad is an open-source printed circuit board by Abluebowobble, from the Abluebowobble/macropad-hackclub repository on GitHub. It is a 2-layer board of 99.9 × 87.3 mm with 48 parts on 46 nets, routed with 498 tracks and 66 vias.
It is built around the SK6812MINI-E and 1N4148WT. Its parts include 31 diodes, 15 switches, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
This is a macropad to add macros on :) i'll probably add shortcuts to open apps like git and terminal, and maybe some shortcuts to fill out git commands if I can figure out an efficient way to do it.
Image of the CAD for this project!

The heatset inserts would be placed in all the holds to keep the case together and keep the pcb board in place! I have items poking out both the front side and the backside, so I'll need to be careful about that when assembling the entire thing. I'll also look into creating adding depressiosn for all the diodes and the XIAO, but thats for later.
Heres an image of the PCB board and schematic!
Image of the pcb
Image of schematic
Here's everything I probably need
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SK6812MINI | hackpad_footprints:SK6812-MINI-E | D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31 |
| 15 | 1N4148WT | Diode_THT:D_A-405_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 14 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14 |
| 1 | Conn_01x04_Socket | KiCad-SSD1306-0.91-OLED-4pin-128x32.pretty-master:SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW15 |
| 1 | XIAO-RP2040-DIP | OPL:XIAO-RP2040-DIP | U1 |

alex1klimovich/nrf52840-macro-controller
Custom nRF52840 productivity controller for digital artists — PCB, BLE/USB firmware, OLED, haptics, RGB, and enclosure CAD.



Shuri-101/MacroPad
Macro Pad for use in CAD and general productivity + convenience, mainly for use in CAD...


anshxlm/hackpad
This is my hackpad! It has 8 backlit keys, a dial, an OLED, and a status LED.

Anycircle11139s/12-key-hackpad
This is my PCB design, after creating the schematic, I imported it into the pcb editor and arranged the parts, which was pretty easy.

It measures 99.9 × 87.3 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the SK6812MINI-E and 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Abluebowobble/macropad-hackclub repository on GitHub, at the commit this page was made from: the board is PCB/hackpad.kicad_pcb and its schematic PCB/hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Abluebowobble before reusing the design.