Skip to the content
2 layers57 × 122.5 mmAutomatic Laundry Weighing System, the printed circuit board in 3D

Automatic Laundry Weighing System

abelyudhoo/Automatic-Laundry-Weighing-System
Size
57 × 122.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
26
Pads
26
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
7 Apr 2026
Updated
26 Jun 2026

Overview

Automatic Laundry Weighing System is an open-source printed circuit board by abelyudhoo, from the abelyudhoo/Automatic-Laundry-Weighing-System repository on GitHub, published under the MIT licence. It is a 2-layer board of 57 × 122.5 mm with 3 parts on 26 nets.

It is built around the WEMOS D1 MINI. Its parts include 2 connectors and 1 IC. It belongs with the ESP8266 boards of this library.

Main components

1

Parts

3
QtyValueFootprintReferences
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4
1WeMos_D1_miniModule:WEMOS_D1_mini_lightU1

Similar boards

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers32.1 × 40.8 mmPower Monitor Version 1, the printed circuit board in 3D

    Power Monitor Version 1

    alcar21/WemosEM

    Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

    8 parts122
  • 2 layers91 × 49 mmWled, the printed circuit board in 3D

    Wled

    wladwnt/wled

    Simple WLED Board (SW: https://github.com/Aircoookie/WLED)

    9 parts102
  • 2 layers97.5 × 59.3 mmControl Board, the printed circuit board in 3D

    Control Board

    kholia/Easy-Digital-Beacons-v1

    A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

    17 parts89
  • 2 layers64.6 × 36.9 mmNavien latest, the printed circuit board in 3D

    Navien latest

    htumanyan/navien

    Navien water heater wire protocol for communication with NaviLink and other attached devices

    30 parts65
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layersTcsmonitor pcb, the printed circuit board in 3D

    Tcsmonitor pcb

    Syralist/tcs-monitor

    ein Bus-Monitor für TCS Klingelanlagen

    14 parts37MIT

Questions

How big is the Automatic Laundry Weighing System PCB?

It measures 57 × 122.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Automatic Laundry Weighing System use?

3 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Automatic Laundry Weighing System KiCad files?

From the abelyudhoo/Automatic-Laundry-Weighing-System repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Automatic Laundry Weighing System design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).