

MPU 6050
NONE
- Size
- 21.1 × 15.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 26
- Pads
- 63
- Tracks, vias
- 145, 21
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Jul 2026
- Updated
- 6 Jul 2026
Overview
MPU 6050 is an open-source printed circuit board by Aarnav902, from the Aarnav902/PCB repository on GitHub. It is a 2-layer board of 21.1 × 15.8 mm with 16 parts on 26 nets, routed with 145 tracks and 21 vias.
It is built around the AP2112K-3.3 and MPU-6050. Its parts include 7 capacitors, 5 resistors, 2 ICs, 1 diode and 1 connector.
Main components
2README
README.mdPCB
NONE
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 2K | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 220uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2nF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 4k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U1 |
More from Aarnav902/PCB
3- 2 layers

- 2 layers

- 2 layers

Similar boards
- 2 layers40 × 40 mm

Esp32Drone
HexaBitsEdu/ESP32-MiniDrone
this project is a drone based on esp32 microcontroller and coreless DC motor
83 parts2 - 2 layers30 × 20 mm

- 2 layers60 × 56 mm

VibrationDT
adityarawat1223/Vibration-Detector
Vibration diagnostic tool using STM32 bare-metal C, on-chip FFT, and custom PCB hardware for bearing fault detection.
35 parts1 - 2 layers25.4 × 17.8 mm

- 2 layers100 × 75 mm

AeroFC
angelowickramasinghe/Project-Drone
AeroFC-1S 1S brushed micro-quad flight controller (KiCad) — schematic, PCB, Gerbers, LCSC BOM
57 parts - 4 layers

Astra Companion
atireksd11/Astra-Companion
This repo holds the carrier PCB, the voice stack on the laptop, and notes for building Astra. Week 1 was the KiCad board.
96 parts - 2 layers31.6 × 57.6 mm

Rocket.Sim
BearsBearsBearsT-T/ESP32-Rocket-Sim-PCB
An MPU and ESP32 powered PCB that tracks motion in real time.
19 parts - 2 layers224.6 × 135 mm

MoveIt PCB - BELLAICHE Chloé
Calinoux7/MoveIt_PCB
Motion Game Controller PCB designed with KiCad 10 – ESP32-S3, MPU-6050, OLED display and I2S audio.
27 parts
Questions
How big is the MPU 6050 PCB?
It measures 21.1 × 15.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MPU 6050 use?
16 parts, built around the AP2112K-3.3 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MPU 6050 KiCad files?
From the Aarnav902/PCB repository on GitHub, at the commit this page was made from: the board is MPU 6050/MPU 6050.kicad_pcb and its schematic AcToDc/AcToDc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MPU 6050 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Aarnav902 before reusing the design.