2 layers140.5 × 30 mm
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0
2 layers65 × 56.5 mm
OctoProxy
Aahil78/OctoProxy1A Raspberry Pi based OctoPrint Server to act as a proxy for remote access of Bambu Lab Printers.
- Size
- 65 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 32
- Pads
- 127
- Tracks, vias
- 232, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Feb 2026
- Updated
- 5 Mar 2026
Overview
OctoProxy is an open-source printed circuit board by Aahil78, from the Aahil78/OctoProxy repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 56.5 mm with 16 parts on 32 nets, routed with 232 tracks and 35 vias.
Its parts include 11 connectors and 1 resistor. It belongs with the computers and single-board computers boards of this library.
README
README.mdOctoProxy
OctoProxy is a raspberry pi based OctoPrint server for the Bambu Lab A1, it acts as a proxy for region locked and LAN Only mode printers to have remote monitoring and access. It also has a Tailscale VPN server to trick Bambu Studio to think you are on your LAN when you arent, this will allow you to send prints from Bambu Studio to any LAN Only printer from anywhere in the world. You can also use it as a printago fuse or simplyprint server.
Features:
- Runs OctoPrint allowing you to send prints from anywhere.
- Uses a Raspberry Pi 4 as the SBC, allowing for upgrades like sensors, lights, software upgrades, and more.
- WS2812B/SK6812 3 Pin connector for custom lights.
- Has a CSI Camera, allowing better timelapses and better video streaming footage. We all know the A1 Camera is..... special.
- GPIO Pins broken out for upgrades.
Images
PCB:
Case:
Schematic:
BOM:
| Item: | Quantity: | Price: | Link: | Total Cost: |
|---|---|---|---|---|
| Raspberry Pi 4 (Already have it) | 1 | $0 | N/A | |
| Raspberry Pi 4 Camera | 1 | $23.08 | Camera | |
| PCB | 1 | $15.78 | ||
| Raspberry Pi Fan | 1 | $4.35 | Fan | |
| Standoffs & Screws | 1 kit | $10 | Screws and standoffs | |
| 3 Pin Female Header | 3 | $2.50 | 3 Pin Header | |
| 4 Pin Female Header | 2 | $2.72 | 4 Pin Header | |
| 7 Pin Female Header | 1 | $3.10 | 7 Pin Header | |
| 6 Pin Female Header | 2 | $2.95 | 6 Pin Header | |
| 2 Pin Male Header | 1 | $1.00 | 2 Pin Header | |
| 1 Pin Header | 1 | $1 | 1 Pin Header | |
| 330ohm Resistor | 1 | $1.47 | Resistor | |
| 40Pin SMT Connector | 1 | $4.77 | SMT Connector | |
| WS2812B LED Strip | 1 | $6.46 | LED Strip | |
| 79.18 (Will pay extra myself) |
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 3 | Conn_01x03_Pin | Connector_Harwin:Harwin_M20-89003xx_1x03_P2.54mm_Horizontal | J2, J6, J11 |
| 2 | Conn_01x04_Pin | Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | J3, J10 |
| 2 | Conn_01x06_Pin | Connector_Harwin:Harwin_M20-89006xx_1x06_P2.54mm_Horizontal | J7, J8 |
| 1 | 330ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J9 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x07_Pin | Connector_Harwin:Harwin_M20-89007xx_1x07_P2.54mm_Horizontal | J4 |
| 1 | GPIO | PCM_SparkFun-Connector:Raspberry_Pi_Shield_Bottom_Entry_No_Mounting_Holes | J1 |
Questions
How big is the OctoProxy PCB?
It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OctoProxy use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OctoProxy KiCad files?
From the Aahil78/OctoProxy repository on GitHub, at the commit this page was made from: the board is src/OctoProxy.kicad_pcb and its schematic src/OctoProxy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OctoProxy design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers41.4 × 14.5 mm
U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm
Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm
V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm
Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm
Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm
- 2 layers21.1 × 26.9 mm
