2 layers47.6 × 27.3 mm
2 layers69.1 × 53.8 mm
LED Memory Game
Aahil78/LED-Memory-GameA simple LED Memory Game built on a custom Arduino Uno Shield
- Size
- 69.1 × 53.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 39
- Pads
- 81
- Tracks, vias
- 77, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Apr 2025
- Updated
- 30 Apr 2025
Overview
LED Memory Game is an open-source printed circuit board by Aahil78, from the Aahil78/LED-Memory-Game repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 69.1 × 53.8 mm with 27 parts on 39 nets, routed with 77 tracks and 3 vias.
Its parts include 4 resistors, 4 diodes and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdLED Memory Game
This is a simple LED Memory Game PCB that sits on top of an Arduino UNO, it has 4 LEDs (Red, Green, Blue, Yellow), 4 Buttons, a vibration motor, dc barel jack, 4 resistors, and that's it!
Slack Username
- @Aahil
- Slack ID: U08GLNF2JMU
Pictures
Schematic
PCB
Features
- Easy to assemble
- Fun to play
- Randomized sequence each time
- Has a time limit to enter sequence fr better gameplay
- Cool!
BOM
- 4 LEDs (Red, Green, Blue, Yellow)
- 4 Resistors (220ohm)
- 4 Pushbuttons
- 1 Vibration Motor
- 1 DC Barrel Jack
- 1 Arduino UNO
- Thats it! (except for a PCB ofc)
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 4 | R | PCM_Resistor_THT_AKL:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 1 | Arduino_Uno_R3_Shield | PCM_arduino-library:Arduino_Uno_R3_Shield | A1 |
| 1 | BLUE | LED_THT:LED_D5.0mm | D2 |
| 1 | BLUE | Button_Switch_THT:SW_Tactile_Straight_KSL0Axx1LFTR | SW2 |
| 1 | Battery | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal_CircularHoles | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | GREEN | LED_THT:LED_D5.0mm | D4 |
| 1 | GREEN | Button_Switch_THT:SW_Tactile_Straight_KSL0Axx1LFTR | SW4 |
| 1 | RED | LED_THT:LED_D5.0mm | D1 |
| 1 | RED | Button_Switch_THT:SW_Tactile_Straight_KSL0Axx1LFTR | SW1 |
| 1 | YELLOW | Button_Switch_THT:SW_Tactile_Straight_KSL0Axx1LFTR | SW3 |
| 1 | YELLOW | LED_THT:LED_D5.0mm | D3 |
Questions
How big is the LED Memory Game PCB?
It measures 69.1 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED Memory Game use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Memory Game KiCad files?
From the Aahil78/LED-Memory-Game repository on GitHub, at the commit this page was made from: the board is src/LEDMemoryGame.kicad_pcb and its schematic src/LEDMemoryGame.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Memory Game design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223