
Usb extractor
A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

some nice PCBs I designed for myself to make my life (and job) a little easier
Splitter is an open-source printed circuit board by A7F, from the A7F/myCrappyPcbs repository on GitHub, published under the MIT licence. It is a 2-layer board of 43.4 × 49 mm with 4 parts on 5 nets, routed with 39 tracks and 39 vias.
these are some nice PCBs I designed for myself to make my life (and job) a little easier.
All the PCBs you see here are actually tested to be functional and working (produced by JLCPCB). However, I'm not an electrical engineer: I design PCBs as an hobby in my free time and I'm still learning, so please, if you find something off feel free to open a PR and contribute!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | MEASURE, REF/IN, THROUGH |
| 1 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | GND |

A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
It measures 43.4 × 49 mm and has 2 copper layers, 1.6 mm thick.
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the A7F/myCrappyPcbs repository on GitHub, at the commit this page was made from: the board is signal_splitter/splitter.kicad_pcb and its schematic can_termination/can_termination.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).