
Can termination
A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

some nice PCBs I designed for myself to make my life (and job) a little easier
Usb extractor is an open-source printed circuit board by A7F, from the A7F/myCrappyPcbs repository on GitHub, published under the MIT licence. It is a 2-layer board of 57.2 × 67.6 mm with 14 parts on 7 nets, routed with 42 tracks and 105 vias.
Its parts include 2 capacitors and 2 resistors.
these are some nice PCBs I designed for myself to make my life (and job) a little easier.
All the PCBs you see here are actually tested to be functional and working (produced by JLCPCB). However, I'm not an electrical engineer: I design PCBs as an hobby in my free time and I'm still learning, so please, if you find something off feel free to open a PR and contribute!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 0R | PCM_SparkFun-Resistor:R_0603_1608Metric | R1, R2 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | ~ | MTA:E6S14A-40MT5-A | DATA, POWER |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | USB 2.0 |
The 10 most common of 14 parts.

A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

A7F/myCrappyPcbs
some nice PCBs I designed for myself to make my life (and job) a little easier

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 57.2 × 67.6 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the A7F/myCrappyPcbs repository on GitHub, at the commit this page was made from: the board is rosenberger_usb_extractor/usb_extractor.kicad_pcb and its schematic can_termination/can_termination.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).