
Oresat gps card
oresat/oresat-gps-hardware
Hardware for OreSat's SDR GPS receive and other SDR GPS projects

Derivative of the OSW using the RAK WisBlock
OSW rakWisblock is an open-source printed circuit board by a-allard, from the a-allard/OSW_rakWisblock repository on GitHub. It is a 4-layer board of 33.8 × 46 mm with 70 parts on 84 nets, routed with 501 tracks and 208 vias.
It is built around the MAX2769BETI/V+T, MIC5365-3.0YC5-TR and ERJ-XGNF1002Y, with the GRM033D70J105ME01D, MBR0540T1G and ERJ-XGNF1003Y among its other parts. Its parts include 36 capacitors, 9 resistors, 5 ICs, 4 connectors and 3 diodes.
This project is a smart watch with the same outline as watchy. This uses a generic footprint that should work with any of the RAK wisblock cores.
If you like this project, please consider supporting my open source projects through: (Note if you use the pcbway link below to order the project it does not cost you anymore but it does help me)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1u | AllardChip:CAPC100X50X60L25N | C1, C2, C3, C4, C5, C6, C7, C10, C11, C12, C13 |
| 7 | 100n | AllardChip:CAPC60X30X39L17L | C15, C17, C19, C21, C23, C25, C29 |
| 5 | 100p | AllardChip:CAPC60X30X33L15L | C16, C18, C20, C22, C24 |
| 5 | 10k | AllardChip:RESC40X20X15L10N | R1, R2, R3, R5, R8 |
| 4 | 1uF | AllardChip:CAPC60X30X39L17L | C33, C34, C35, C36 |
| 4 | M3 1mm | AllardMountingHW:MTGNP300H213Z565 | MP1, MP2, MP3, MP4 |
| 3 | MBR0540T1G | AllardSOD:SOD370X155X135L32X57L | D1, D2, D3 |
| 2 | 10n | AllardChip:CAPC40X20X22L10L | C31, C32 |
| 2 | 4.7u | AllardChip:CAPC200X125X145L45N | C8, C9 |
| 2 | 470p | AllardChip:CAPC60X30X33L15L | C27, C30 |
| 2 | MAX8510EXK29+T | AllardSOT:SOT23-5P65_210X110L42X22L | U3, U4 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 2 | tactile_sw | AllardSpecialFootPrints:Panasonic_EVQPUA02K | S1, S2 |
| 1 | 0 | AllardChip:RESC60X30X26L15N | R9 |
| 1 | 0524352471 | AllardConnFootPrints:MOLEX_52435-2471 | J2 |
| 1 | 1.575GHz ANT | AllardANT:MOLEX_1462350001_CHIP | AN1 |
| 1 | 100k | AllardChip:RESC40X20X15L10N | R4 |
| 1 | 10114830-10102LF | AllardConnFootPrints:AMPHENOL_10114830-10102LF | J4 |
| 1 | 10k | AllardChip:RESC40X20X15L10L | R7 |
| 1 | 10u | AllardChip:INDC400X400X120L120N | L2 |
| 1 | 1uF | AllardChip:CAPC60X30X39L17N | C16 |
| 1 | 20k | AllardChip:RESC60X30X26L15L | R6 |
| 1 | 27p | AllardChip:CAPC60X30X33L15L | C26 |
| 1 | 6.8n | AllardChip:CAPC60X30X33L15L | C28 |
| 1 | MAX2769B | Allard_dfn_qfn:QFN29P50_500X500X80L55X25T325L | U2 |
| 1 | MCP73811T-420I/OT | AllardSOT:SOT23-5P95_270X145L35X35L | U1 |
| 1 | MIC5365-3.0YC5-TR | AllardSOT:SOT23-5P65_210X110L33X22N | U5 |
| 1 | SI1308EDL-T1-GE3 | AllardSOT:SOT23-3P65_210X110L20X32L | Q1 |
| 1 | TXETCDSANF-16.368000 | Allard_dfn_qfn:OSCDFN4_250X320X100L70X80L | Y1 |
| 1 | USB micro | AllardFootPrints:GCT_USB3075-30-A | J5 |
| 1 | WisBlock | AllardConnFootPrints:TXGA_FBB04004-F40S1003K6M | J1 |
The 69 most common of 70 parts.

oresat/oresat-gps-hardware
Hardware for OreSat's SDR GPS receive and other SDR GPS projects

snorkman88/suntastic
An ultra low-power management board for IoT devices


victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying

wiretap-retro/A500-USB-Keyboard-Adapter-RP2040
A USB keyboard adapter for the Amiga 500 based on the Pi Stamp RP2040

wiretap-retro/A2000-USB-Keyboard-Adapter-RP2040
A USB keyboard adapter for the Amiga 2000 based on the Pi Stamp RP2040


It measures 33.8 × 46 mm and has 4 copper layers, 1.6 mm thick.
70 parts, built around the MAX2769BETI/V+T, MIC5365-3.0YC5-TR, ERJ-XGNF1002Y and GRM033D70J105ME01D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the a-allard/OSW_rakWisblock repository on GitHub, at the commit this page was made from: the board is oswRAKwisBlock.kicad_pcb and its schematic gpsMod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask a-allard before reusing the design.